/* =====================================================================
   Y · QFEX — the Instrument design system, v5.

   A physical control panel rather than a screen: panels that sit ON a ground
   with a hard bottom edge and a lit top edge, wells that sink INTO it, and
   controls whose selected state is a switch pressed in rather than a colour
   swapped out. Nothing floats; everything is seated.

   THE PANEL IS CUT FROM ONE OF TWO MATERIALS — the warm grey deck described
   below, and matt black. See THE GROUNDS after the token block: everything in
   this file is stated in five base channels at an alpha, so the second
   material is thirty values rather than a second stylesheet, and every rule
   of the grammar below survives it unchanged.

   THE SURFACE GRAMMAR — three states, used everywhere, never mixed:
     RAISED   a plate on the ground.  gradient ink-light → ink-dark,
              `0 2px 0 var(--edge)` hard bottom, `inset 0 1px 0 white` lip.
     WELL     a recess cut into it.   flat --well fill,
              `inset 0 1px 3px black` shadow, `inset 0 -1px 0 white` floor.
     PRESSED  a switch pushed in.     near-black fill, light type,
              `inset 0 2px 4px black`. This is the ONLY "on" state.

   COLOUR — the ground and its plates are neutral so the market can carry
   every hue in the room. There are exactly five: --bid, --ask, --warn,
   --accent (the venue mark: the LED, the index line, the primary action)
   and ink. A sixth would be a bug.

   TYPE — two voices. Archivo carries structure: labels are 700, ~8px,
   .15em tracked, uppercase — a legend engraved on a panel, not a sentence.
   JetBrains Mono carries every number, always. Prose sits between them at
   normal weight. There is no serif; the brand is the Y mark and its node.

   MOTION — a control is an object with mass, so every gesture has a
   direction and a weight, and the same gesture means the same thing on
   every surface. Three curves: --ease is the system's general move;
   --settle comes to rest with a long tail and never overshoots;
   --contact accelerates into a stop, the way a key bottoms out. Five
   durations, each named for the moment it belongs to:

     ARRIVE  --tArrive .13s --ease     the pointer reaches a control: ink
             to full, the face catches the light. Acknowledgement, not
             travel — nothing moves yet.
     LEAVE   --tLeave  .28s --settle   twice as long as arriving. A plate
             that decays reads as material; one that snaps off reads as a
             web page. That asymmetry is most of what reads as quality.
     TOUCH   --tTouch  .07s --contact  the plate goes DOWN into its own
             standoff. Contact is instant; nobody watches a key travel.
             Release is a LEAVE, so it settles instead of snapping back.
     THROW   --tState  .22s --settle   a plate becoming a pressed switch.
             "On" is a state change, and a state change settles; a switch
             that steps reads as a repaint of the page.
     ENTER   --tEnter  .18s --settle   something arriving from the surface
             it belongs to — the plate's ⇄ ⚙ ✕, the DOM popover.

   Only transform and opacity move. The two shadow states a control needs
   ride on pseudo-elements whose OPACITY is animated: the wall draws nine
   live canvases under one uncapped rAF loop and re-rasterising a
   box-shadow every frame is a cost it cannot pay. Nothing that reflows is
   ever transitioned — a control that shoved its neighbours would be a bug,
   not a flourish. Canvases handle their own motion, dt-eased, at the
   display's native refresh. Under prefers-reduced-motion every state
   survives and every travel goes.
   ===================================================================== */

:root{
  /* ---- THE FIVE BASE CHANNELS — every wash, hairline, edge and shadow in
     this stylesheet is one of these at an alpha, stated as an RGB TRIPLE so a
     ground can be swapped without rewriting 400 rules (see THE GROUNDS,
     below). Ink is the type and everything drawn in it; the light is what
     falls on a plate from above; the shadow is what it casts. The hues are
     the same five --bid/--ask/--warn/--accent carry, in the form a wash needs.
     --litK and --shdK scale the light and the shadow for a ground that
     reflects less of one and hides more of the other: on matt black a lip at
     .9 white is a glare and a scrim at .5 black is nothing. Nothing else is
     scaled — ink and the hues are re-stated as values, because on a black
     ground they are not the same colours dimmed, they are different colours. */
  --ink:26,26,26;          /* full-strength ink: type, hairlines, every wash */
  --lit:255,255,255;       /* the light on a plate: lips, floors, lit edges */
  --litK:1;
  --shd:0,0,0;             /* the shadow it casts: wells, scrims, standoffs */
  --shdK:1;
  --bidRGB:47,107,58; --askRGB:176,58,46; --warnRGB:154,128,50;
  --accRGB:226,50,30; --acc2RGB:240,90,40;

  /* ---- ground & plates ---- */
  --void:#c9c8c4;          /* the panel ground */
  --panel:#cfcecb;         /* a quieter region of ground (rails, gutters) */
  --panel2:#f1f0ec;        /* a raised plate */
  --panel3:#e7e6e1;        /* the far side of a plate gradient */
  --raise:#e9e8e3;         /* a small raised control */
  --well:#c5c4c0;          /* a recess */
  --well2:#cbcac6;         /* a shallower recess */
  --edge:#bcbbb6;          /* the hard bottom edge of every plate */
  --lip:rgba(var(--lit),calc(.9*var(--litK)));       /* the lit top edge */
  --sink:rgba(var(--shd),calc(.15*var(--shdK)));           /* the shadow inside a well */
  --floor:rgba(var(--lit),calc(.75*var(--litK)));    /* the lit floor of a well */
  --dark:#1e1e1e;          /* a pressed switch */
  --dark2:#0b0b0b;         /* its edge */
  --onDark:#e6e5e1;        /* type on a pressed switch */
  --onDark2:rgba(230,229,225,.66);
  /* Two well tones, chosen by what sits in them. A book or a heatmap paints
     nearly edge to edge and wants a darker floor to read against; a line chart
     is mostly empty and wants a light one, or the curve fights the ground. */
  --wellLite:#f4f3ef;

  /* ---- hairlines ---- */
  --hair:rgba(var(--ink),.09);

  /* ---- ink ---- */
  --text:#1a1a1a; --dim:#4a4a48; --faint:#7a7975; --ghost:#9a9995;

  /* ---- the five hues ---- */
  --bid:#2F6B3A; --bidDeep:#2a5c33; --bidSoft:#7fbf8c;
  --ask:#B03A2E; --askDeep:#8f3225; --askSoft:#e08d82;
  --warn:#9A8032; --warnDeep:#6f5522; --warnWash:#f0ead9;
  --warnSoft:#c8a94a;                      /* the fee's gold where it sits on a dark plate */
  --accent:#E2321E;                       /* the LED */
  --accent2:#F05A28; --accentHi:#f4693a; --accentLo:#ee5322; --accentEdge:#b23f18;
  /* a LIT STAR IS SEATED, like every raised face in this system: on the grey
     deck the seat is the hard edge it casts down (js/ui/fav.js) */
  --favSeat:drop-shadow(0 1px 0 rgba(178,63,24,.42));
  /* A SECTOR MARK IS ENGRAVED, NOT PRINTED (js/ui/sectormark.js): ink at
     full strength and one lit hairline under it, the way --grooveSh cuts a
     rule. On a thrown switch the lit edge moves to the top of the cut and
     takes the legend's own tone, because there the light is on the floor. */
  --smkSeat:drop-shadow(0 .8px 0 rgba(var(--lit),calc(.85*var(--litK))));
  --smkSeatOn:drop-shadow(0 -.7px 0 rgba(230,229,225,.32));

  /* ---- metrics ---- */
  --fs:13px; --grain:.055;

  /* ---- motion: one curve and one duration per gesture (see MOTION above).
     Named for the moment, never for the number — a duration called .18s
     tells the next maintainer nothing about when to reach for it. ---- */
  --ease:cubic-bezier(.2,.7,.2,1);      /* the system's general move */
  --settle:cubic-bezier(.32,.72,0,1);   /* comes to rest: long tail, no overshoot */
  --contact:cubic-bezier(.4,0,.9,1);    /* accelerates into a stop: a plate going down */
  --inout:cubic-bezier(.65,0,.35,1);    /* leaves rest and comes back to it: a bob, a sweep, a lift and drop */
  --rise:cubic-bezier(.2,.9,.25,1);     /* a panel grown from its row: quick out of it, a small give at the top */
  --glide:cubic-bezier(.2,.8,.2,1);     /* a glass capsule arriving: out of its start at once, a long landing with a small give (the landing's bar) */
  --carry:cubic-bezier(.3,1.35,.4,1);   /* a pill carried to the link under the hand: it overshoots a little and returns */
  --lift:cubic-bezier(.3,1.4,.4,1);     /* a glass button lifting under the hand: a touch more give than the carry */
  --bead:cubic-bezier(.3,1.25,.4,1);    /* the chosen view's bead moving to a key (Drive's capsule): less give than the carry */
  --wipe:cubic-bezier(.45,.05,.15,1);   /* a line drawn across: slow to leave and a long glide */
  --sheen:cubic-bezier(.45,.05,.25,1);  /* one light crossing a key: slow to leave, a long settle */
  --draw:cubic-bezier(.3,0,.4,1);       /* drawn back: leaves rest, holds at the back (a shot's picture pulled into its clip) */
  --strike:cubic-bezier(.6,0,.8,.4);    /* gathers speed and leaves at it (a shot's picture thrown into its clip) */
  --tArrive:.13s;    /* the pointer reaches a control */
  --tLeave:.28s;     /* it leaves again, or a press is let go */
  --tTouch:.07s;     /* the plate travels down */
  --tState:.22s;     /* a switch throws */
  --tEnter:.18s;     /* something appears */
  --fade:cubic-bezier(.2,0,0,1);   /* a dissolve: leaves at once, settles long (Reduce motion's, the swaps') */
  /* RE-RANK is the sixth gesture and the only one CSS cannot measure: the
     movement is the difference between two layouts, so js/ui/motion.js owns
     it and publishes the curve back here as --spring / --tFlight at boot.
     The values below are the fallback that stands in until it does — and the
     one a browser without `linear()` easing keeps. Never re-time a re-rank
     from a stylesheet: the plates, the market table and the picker rail all
     read these, and a set that re-ranks at two speeds is two events. */
  --spring:var(--settle);
  --tFlight:400ms;

  /* each voice names its metric-matched fallback second (css/fonts.css), so
     the text is laid out where it will stay before the file lands; --sans
     names "Y Digits" first, JetBrains Mono's ten digits alone, so a digit is
     the figures' digit wherever it stands (a ticker, a timeframe, a sentence) */
  --sans:"Y Digits",Inter,"Inter Fallback","Helvetica Neue",system-ui,sans-serif;
  --mono:"Y Figures",Inter,"JetBrains Mono","JetBrains Mono Fallback",ui-monospace,monospace;   /* a figure's characters in JetBrains Mono, its letters in Inter (fonts.css → Y Figures) */
  --monoAll:"JetBrains Mono","JetBrains Mono Fallback",ui-monospace,monospace;   /* every character in mono: the P&L card's own (branding) */

  /* ---- composed surfaces (used by hand below; kept here so they are one truth) ---- */
  --plate:linear-gradient(180deg,var(--panel2),#e5e4df);
  --plateTall:linear-gradient(180deg,var(--panel2),var(--panel3));
  --plateSh:0 2px 0 var(--edge),0 6px 14px rgba(var(--shd),calc(.1*var(--shdK))),inset 0 1px 0 var(--lip);
  --plateShSm:0 2px 0 var(--edge),inset 0 1px 0 var(--lip);
  --wellSh:inset 0 1px 3px var(--sink),inset 0 -1px 0 var(--floor);
  /* THE DOM'S WELL — every chart, DOM, order book and heatmap is drawn in one,
     cut from the ground in force (v8.1 · R13: there is no other room). On the
     grey deck it is PAPER: a sheet
     under glass set into the plate, BRIGHTER than the plate it sits in, with
     the occlusion of the cut along its top edge, the cut's own hairline round
     it and the deck's light on the lip under it. Brighter, because a book
     paints edge to edge and ink needs the whole range between the sheet and
     black: the first light DOM sat on --well2 (L80), and a field whose floor
     is mid-grey has nowhere to go but mid-grey on mid-grey — which is why the
     well was then made matt black on both grounds (v6.25–v6.27). On paper the
     field is ink and
     not light: its ramps run from a whisper of tint to the densest pigment
     (js/ui/dompaint.js → HEAT.light). The canvas cuts "back to the ground" in
     PAL.domWell (js/ui/charts.js), so the two must be the same colour. */
  --domWell:#f9f8f5;
  --domWellSh:inset 0 1px 2px rgba(var(--shd),calc(.2*var(--shdK))),inset 0 0 0 1px rgba(var(--ink),.1),0 1px 0 var(--lip);
  /* THE WELL A SWITCH BANK IS CUT INTO. On the grey deck it is an ordinary
     well and these two are exactly --well / --wellSh. It is named separately
     because on matt black it cannot be: see the dark twin. */
  --segWell:var(--well);
  --segWellSh:var(--wellSh);
  --wellLiteSh:inset 0 1px 3px rgba(var(--shd),calc(.1*var(--shdK))),inset 0 0 0 1px rgba(var(--ink),.05);
  --pressSh:inset 0 2px 4px rgba(var(--shd),calc(.5*var(--shdK)));
  /* a plate held down: it has spent its standoff and sits in its own shadow.
     Momentary, and lighter than --pressSh — being pushed is not being ON. */
  --downSh:inset 0 2px 5px rgba(var(--shd),calc(.2*var(--shdK))),inset 0 -1px 0 rgba(var(--lit),calc(.4*var(--litK)));
  /* an engraved groove, not a border: a dark hairline with a lit one under it */
  --grooveSh:inset 0 -1px 0 rgba(var(--shd),calc(.08*var(--shdK)));
  /* the same groove stood on end, for a rule BETWEEN two segments of one
     instrument: dark hairline, lit hairline to its right */
  --grooveShV:1px 0 0 rgba(var(--lit),calc(.66*var(--litK)));
  /* the accent ring means KEYBOARD FOCUS and nothing else, anywhere. It is
     the one ring in the system, so it can never be mistaken for hover. */
  --ring:rgba(var(--acc2RGB),.38);
  /* v8 S5 · THE TYPING STATE. A field you are writing in wears a hairline of
     ink cut round the inside of its own well, never the orange ring: the
     caret already says where the keys go, and an orange ring on a field that
     is one part of a larger control drew a second outline inside the first.
     --ringSh was that orange ring on every field; it now NAMES the typing
     state, so every host that asks for it takes the new cut (css/ds.css →
     THE FOCUS SYSTEM). */
  --editSh:inset 0 0 0 1px rgba(var(--ink),.3);
  --ringSh:var(--editSh);

  /* the film grain sits UNDER the light on the grey deck, multiplying */
  --grainBlend:multiply;
  /* the rail, the one scrollbar the product draws (ds.css → THE SCROLL): the ground's ink at an alpha, so it is
     every ground's own and reads on any plate it crosses; under the pointer or held, one step darker */
  --scroll:rgba(var(--ink),.24); --scrollHi:rgba(var(--ink),.46);
  /* the chip a label floating over data is cut from. On the grey deck it is
     the pressed switch's own near-black; on matt black a chip cannot be the
     darkest thing in the room, so the two part company (see THE GROUNDS). */
  --chip:var(--dark); --chipRing:0 0 0 0 transparent;

  /* ---- the surfaces that are a ROLE rather than a step: one statement each,
     because each of them is drawn in a dozen places and a ground has an
     opinion about all of them at once. ---- */
  --track:#b3b2ae;         /* the sunken track a meter or a fader runs in */
  --trackRun:#d8875f;      /* the run a fader has covered: the mark's orange, softened — the same on matt black */
  --prose:#3a3a38;         /* a sentence, and a setting's own label */
  --plateHi:linear-gradient(180deg,#faf9f5,#ebe9e4);  /* a plate, one step up */
  --plateHov:#f8f7f4;      /* a row under the pointer */
  --plateCur:#fbfbf9;      /* the row that is open, or is the answer */
  /* (--selPlate, the dark plate a selected row once wore, is gone: the selected row is the lifted face, --selFace, on
     every ground; its dark plate kept a row's figures in dark ink (owner, 2026-11-10 · design-kit-d4)) */
  --wkndInk:#b0672e; --wkndWash:#f5ead9;  /* the session nobody is quoting into */
  /* THE VEIL A SECONDARY SURFACE PUTS THE PAGE BEHIND IT UNDER. It has to be
     stated, because the obvious spelling of it — ink at an alpha — is wrong:
     ink is a VALUE and it flips, so the six dialogs that dim the page were
     throwing a 36% near-WHITE wash over matt black and the wall came up milky
     behind the market browser. A veil is not ink. It is the absence of light,
     and it is dark in both rooms. */
  --veil:rgba(26,26,26,.36);
  /* (v9 · Q231) THE TABS' OVERVIEW: THE PAGE HELD BACK, never blurred (css/ds.css → THE OVERVIEW). On paper the held
     page is a shaded sheet casting a real shadow on a room a step deeper, and the windows are bright paper plates with
     their own lift (the owner: v1's paper "not good"). The hold's tone is the page's one shade (owner 2026-11-05):
     the lamp lights the room alone (drawn on the hold, scaled with it: the screen's top in its own pixels at the
     page's held share, .86), the rest per ground */
  --tovLampA:.45;
  --tovLamp:radial-gradient(calc(80vw / .86) calc(60vh / .86) at 50% calc(12vh - 8.14vh),rgba(var(--lit),var(--tovLampA)),rgba(var(--lit),0) 72%);
  --tovRoom:#a3a098; --tovHold:rgba(232,230,225,.93); --tovHoldR:20px;
  --tovHoldSh:inset 0 1px 0 rgba(255,255,255,.65),0 0 0 1px rgba(52,44,36,.1),0 46px 90px -34px rgba(38,32,26,.5),0 0 0 200vmax var(--tovRoom);
  --tovCard:linear-gradient(180deg,#fdfcfa,#f3f2ee); --tovCardHov:#fefefd; --tovCardCur:#ffffff;
  --tovCardSh:0 0 0 1px rgba(52,44,36,.07),0 1px 2px rgba(52,44,36,.08),0 14px 32px -12px rgba(38,32,26,.34),inset 0 1px 0 #fff;
  --tovCardHiSh:0 0 0 1px rgba(52,44,36,.08),0 2px 4px rgba(52,44,36,.08),0 22px 46px -14px rgba(38,32,26,.42),inset 0 1px 0 #fff;
  --frost:rgba(246,245,241,.92);          /* a panel floating over a page, blurred */
  --frostFlat:rgba(241,240,236,.92);      /* the same, with nothing behind it */
  --hudPlate:rgba(246,245,241,.85);                     /* the readout over a picture */
  --railSh:0 0 0 1px rgba(var(--ink),.08),0 4px 14px rgba(var(--shd),calc(.14*var(--shdK))),inset 0 1px 0 var(--lip);  /* a bank of keys floating over a chart */
  --hudTick:linear-gradient(180deg,#8d8c88,#67665f);
}

/* =====================================================================
   THE GROUNDS — the same panel, cut from two materials.

   Everything above is the warm grey deck. Below is MATT BLACK, and it is
   thirty-odd values rather than a stylesheet of its own: every wash,
   hairline, lip and shadow in the 3,100 rules that follow is already one of
   the five base channels at an alpha, so re-stating the channels re-lights
   all of them at once. What is stated here is only what a change of MATERIAL
   changes — not a shade of the same thing.

     THE LIGHT AND THE SHADOW TRADE PLACES. --litK drops the light to a
     seventh: a lip at .9 white is a lamp reflected in gloss, and this is
     matt. --shdK raises the shadow, which then does almost nothing, because
     black has no room left to darken — so depth stops being a shadow cast
     DOWN and becomes a line of light caught along an edge. That is what
     makes the plates read as milled aluminium anodised black rather than as
     rectangles of #1e1e1e.

     THE FILLS RUN L3 TO L14 AND THEY ARE FLAT. Seven steps in eleven points
     of lightness. A plate is lighter than its ground, a well is darker, and
     a pressed switch is the bottom of the scale — the grammar is unchanged,
     it is only quieter, which is the whole of what "matt" means.

     A PRESSED SWITCH KEEPS ITS FLOOR. On the grey deck a switch thrown ON
     goes near-black and the inset shadow says it is in a hole. Here the hole
     and the panel are both black, so the shadow says nothing and the floor
     says everything: --pressSh carries a lit bottom lip, the one edge a
     recess would actually catch light on, and the legend on it goes to full
     strength. Nothing becomes a colour; "on" is still a switch.
   ===================================================================== */
html[data-theme="dark"]{
  color-scheme:dark;

  /* ---- the five base channels ---- */
  --ink:222,220,213;       /* ink is a value, so it flips */
  --litK:.16;              /* matt: a plate catches a sixth of the light */
  --shdK:1.9;              /* and hides most of the shadow */
  /* the market's hues, re-lit for this ground. These four are also written
     inline by js/store.js → applyAppearance() from your own colours
     through js/theme.js → liftHue(); the values here are what a build with
     no saved colours stands on, and the two agree by construction. */
  --bidRGB:65,161,85; --askRGB:224,91,73; --warnRGB:212,181,71;
  /* --accRGB and --acc2RGB are NOT re-stated. The venue's orange is the mark,
     and the mark is the one thing that is the same colour in every room. */

  /* ---- ground & plates: seven flat steps, L2 → L13. The deck goes DOWN
     rather than the plates going up: a plate at L13 on a deck at L5 reads as
     milled metal, the same two at L13 and L10 read as one flat rectangle. ---- */
  --void:#0c0c0b;          /* the panel ground */
  --panel:#080807;         /* a quieter region of ground (rails, gutters) */
  --panel2:#1c1c1a;        /* a raised plate */
  --panel3:#151514;        /* the far side of a plate gradient */
  --raise:#222220;         /* a small raised control */
  --well:#070706;          /* a recess */
  --well2:#0a0a09;         /* a shallower recess */
  --wellLite:#131312;      /* the recess a line chart sits in */
  --edge:#000;             /* the hard bottom edge of every plate */
  --dark:#000;             /* a pressed switch: the bottom of the scale */
  --dark2:#000;
  --onDark:#f3f2ee;
  --onDark2:rgba(243,242,238,.62);

  /* ---- hairlines ---- */

  /* ---- ink ---- */
  --text:#edebe5; --dim:#9e9c94; --faint:#6f6e67; --ghost:#514f4a;

  /* ---- the hues that are NOT the desk's: the deep, soft and wash of each,
     re-cut for black. A wash is a tint of the ground here, not of paper. ---- */
  --bidDeep:#2f7a41; --bidSoft:#93d6a4;
  --askDeep:#a8382a; --askSoft:#f0968a;
  --warnDeep:#9c8030; --warnWash:#201c0d; --warnSoft:#dcc069;
  /* the star's seat, re-cut for black: a shadow cast on matt black is
     nothing, so what seats the glyph here is the lamp on its top edge */
  --favSeat:drop-shadow(0 -.6px 0 rgba(255,214,190,.34));
  /* the sector mark's seat, re-lit for black. Scaled by --litK it would be a
     sixth of a hairline and the mark would read as printed; the lit edge a
     cut in anodised black catches is brighter than that, and fixed. On a
     pressed switch at the bottom of the scale it is the floor's own light. */
  --smkSeat:drop-shadow(0 .8px 0 rgba(255,255,255,.28));
  --smkSeatOn:drop-shadow(0 -.7px 0 rgba(243,242,238,.22));

  /* ---- composed surfaces. Only the four the material changes: the rest
     (--lip, --sink, --floor, --plateSh, --wellSh, --wellLiteSh, --downSh,
     --grooveShV, --ringSh) are already written in the base channels and
     re-light themselves. ---- */
  --plate:linear-gradient(180deg,#201f1e,#181817);
  /* a shadow cast on black is nothing, so the plate's standoff is a hard
     black edge and a tight, opaque pool rather than a wide soft one */
  --plateSh:0 2px 0 var(--edge),0 4px 10px rgba(0,0,0,.6),inset 0 1px 0 var(--lip);
  /* A SWITCH IN A BLACK PANEL IS A MILLED CUT, AND A CUT IS NOT AN OUTLINE.
     The thing to get right here is WHERE THE DEPTH COMES FROM. It is not the
     switch: the switch is #000 and it has nowhere to go. It is the MATERIAL
     AROUND the switch, which is why --segWell exists a few lines down — a bank
     at L9 with a black face cut into it is a hole, and the same face in a well
     at L1.9 is a rectangle you can only find by reading its legend.

     Given that, this is three lines and no ring. The occlusion under the top
     wall, tight rather than wide, because a wide pool of black on black is just
     black. A soft pool of light rising off the floor — the one surface in a
     recess that actually faces the lamp. And the crisp line where that floor
     meets the wall. Dark at the top, bright at the bottom, NOTHING at the
     sides: that asymmetry is the depth. An even 1px rim all the way round was
     the first attempt at this and it was wrong twice over — this system draws a
     rule as an engraved groove and never as a border, and a real cut has no
     even edge. */
  --pressSh:inset 0 2px 4px -1px rgba(0,0,0,1),
            inset 0 -6px 6px -6px rgba(255,255,255,.10),
            inset 0 -1px 0 rgba(255,255,255,.26);
  /* THE BANK IS LIFTED SO THE SWITCH HAS SOMEWHERE TO GO. This is the argument
     --track already makes one screen up — "a track is a groove that HOLDS
     something, so unlike a well it has to be legible empty" — and a switch bank
     holds something too: it holds a face that goes to the bottom of the scale.
     On the grey deck --well is L77 and --dark is L12 and the cut is obvious. On
     matt black --well is L1.9 and --dark is L0, and every bank in the product —
     the span, the group, the lens, the windows, the weights, the funding units
     — was four faces with no answer among them. So the bank sits a step ABOVE
     the deck here, and the hole is nine points deep instead of two. */
  --segWell:#191917;
  --segWellSh:inset 0 1px 2px rgba(0,0,0,.7),inset 0 -1px 0 rgba(255,255,255,.05);
  /* on matt black the DOM's well is simply the deck's deepest recess */
  --domWell:var(--well2);
  --domWellSh:var(--wellSh);
  /* a groove on black is the lit hairline alone — the dark one has nowhere
     left to go */
  --grooveSh:inset 0 -1px 0 rgba(var(--lit),.055);
  --ring:rgba(var(--acc2RGB),.55);
  --editSh:inset 0 0 0 1px rgba(var(--ink),.34);

  /* the grain is what stops a black ground reading as a hole in the display:
     on matt black it sits ON the light, screening, rather than under it */
  --grainBlend:screen;
  /* a floating label is a plate one step above the deck, not a hole in it */
  --chip:#262624; --chipRing:inset 0 0 0 1px rgba(var(--lit),.1);

  /* ---- the roles ---- */
  /* a track is a groove that HOLDS something, so unlike a well it has to be
     legible empty: on black it sits a step ABOVE the plate it is cut into and
     its own inset shadow is what says it is a recess */
  --track:#34342f;
  --prose:#c3c1b9;
  --plateHi:linear-gradient(180deg,#262624,#1f1f1d);
  --plateHov:#222220; --plateCur:#272725;
  /* a selected row has to come UP off a black deck, not go down into it */
  --wkndInk:#d08a4c; --wkndWash:#241a0e;
  /* deeper than the deck's, because the deck is already nearly black and a
     .36 veil over it would not read as the page stepping back at all */
  --veil:rgba(0,0,0,.62);
  /* (Q231) the overview on matt black: the held page under a deep tone, a lit rim for an edge (a shadow is nothing
     here), the windows the deck's own plates */
  --tovHold:rgba(12,12,11,.9); --tovRoom:#030303; --tovLampA:.1;
  --tovHoldSh:inset 0 0 0 1px rgba(var(--lit),calc(.7*var(--litK))),0 0 0 200vmax var(--tovRoom);
  --tovCard:var(--panel3); --tovCardHov:var(--panel2); --tovCardCur:var(--thumb);
  --tovCardSh:0 1px 0 var(--edge),0 12px 32px rgba(var(--shd),calc(.16*var(--shdK))),inset 0 1px 0 var(--lip);
  --tovCardHiSh:0 1px 0 var(--edge),0 18px 44px rgba(var(--shd),calc(.26*var(--shdK))),inset 0 1px 0 var(--lip);
  --frost:rgba(20,20,18,.88); --frostFlat:rgba(24,24,22,.95);
  --hudPlate:rgba(22,22,20,.82); --hudTick:linear-gradient(180deg,#4a4944,#2c2b28);
  --railSh:0 0 0 1px rgba(var(--lit),.07),0 6px 18px rgba(0,0,0,.55),inset 0 1px 0 var(--lip);
}

/* THE WELLS WEAR THE THEME'S GROUND, ALWAYS (v8.1 · R13). The grey deck's
   well is paper and matt black's is its own deepest recess; there is no other
   room. Until v8.1 two MIXED rooms stood here — black glass in the grey deck
   and paper in matt black, stated by the theme and a second attribute of the
   well's own together — because the owner had asked for the well as a
   material of its own (a setting pinned it). A ground pinned apart from the theme read as a chart that
   did not follow it, and the owner asked for them to be one: the setting, the
   attribute and both rooms are gone (js/theme.js, docs/contracts/grounds.md). */

/* The two pages that keep LOCAL inks of their own (the cross-section's flat
   dialect and the funding table's) declare them on their own root, so their
   matt-black twins have to be stated the same way rather than as tokens up
   there. Nothing else in the product does this — if a third page ever wants a
   local ink, its dark twin belongs here beside these two. */
html[data-theme="dark"] .spg{
  --spgLbl:#8a8981; --spgChip:#a5a39a;
  --spgPlate:linear-gradient(180deg,#2a2a27,#1b1b19);
  /* a load's fill in a black recess is lit, as the headline's meter is: the
     paper's dark ink sank into it and the rows seemed not to fill */
  --spgFill:linear-gradient(180deg,#8d8c88,#5f5e59);
}
html[data-theme="dark"] .fd{
  --fdLbl:#8a8981;
  /* the hues are LIFTED on this ground (js/theme.js → liftHue), so the same
     wash carries further: the heat goes a little shallower to land in the
     same place the light face does */
  --fdHeat:.42;
  /* and ink is a VALUE, so a lane's run flips from a dark solid to a light
     one. At full strength that makes it the brightest thing in the row on a
     matt-black deck, which a bar carrying no figure has no business being. */
  --flInkK:.62;
}

/* =====================================================================
   THE THIRD GROUND — GRAPHITE (owner, 2026-11-05: "ship the graphite"; js/theme.js → THE DARK FAMILY).
   A member of the dark family, not a third mode: `data-theme` stays "dark", so every matt-black rule, the canvas's
   dark table and the hue lift hold, and `data-ground` re-states only what the material changes — the deck, the
   plates, the wells, the ink and the shadow. Graphite is the same anodised panel in a lighter, warm grey (deck L .23,
   plates L .30): a shadow has room again, so a plate reads by its lip AND its pool. Generated in OKLab from matt
   black's own steps (surfaces L' = .09 + .94 L, ink L' = .14 + .86 L, the same warm hue), so every step keeps its
   place in the scale. A dark rule elsewhere that states a literal owes a graphite twin (ds.css, mobile.css).
   ===================================================================== */
html[data-theme="dark"][data-ground="graphite"]{
  --ink:227,225,218; --litK:0.26; --shd:0,0,0; --shdK:1.6;
  --void:#1f1e1c; --panel:#1b1917; --panel2:#2f2e2c; --panel3:#282725; --raise:#353432;
  --well:#191816; --well2:#1d1c1a; --wellLite:#262523; --edge:#040403; --dark:#0a0907; --dark2:#040403;
  --onDark:#f5f4f0; --onDark2:rgba(245,244,240,.62);
  --text:#f0eee8; --dim:#aca9a1; --faint:#89867f; --ghost:#676560; --prose:#ccc9c1;
  --warnWash:#332f1f; --wkndWash:#372c20;
  --plate:linear-gradient(180deg,#33322f,#2b2a28);
  --plateSh:0 2px 0 var(--edge),0 4px 10px rgba(var(--shd),.5),inset 0 1px 0 var(--lip);
  --pressSh:inset 0 2px 4px -1px rgba(var(--shd),.9),inset 0 -6px 6px -6px rgba(255,255,255,.10),inset 0 -1px 0 rgba(255,255,255,.26);
  --segWell:#2c2b29; --segWellSh:inset 0 1px 2px rgba(var(--shd),.7),inset 0 -1px 0 rgba(255,255,255,.05);
  --ring:rgba(var(--acc2RGB),.55);
  --chip:#393836; --track:#474643;
  --plateHi:linear-gradient(180deg,#393836,#32312f); --plateHov:#353432; --plateCur:#3a3937;
  --veil:rgba(10,10,9,.55);
  --tovHold:rgba(31,30,28,.9); --tovRoom:#131210;
  --frost:rgba(39,38,36,.88); --frostFlat:rgba(43,42,40,.95);
  --hudPlate:rgba(41,40,38,.82); --hudTick:linear-gradient(180deg,#5c5b58,#3f3d3b);
  --railSh:0 0 0 1px rgba(var(--lit),.07),0 6px 18px rgba(var(--shd),.55),inset 0 1px 0 var(--lip);
  --caret:url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='8' height='6'%3E%3Cpath d='M0 0h8L4 6z' fill='%23aca9a1'/%3E%3C/svg%3E");
  --caretOn:url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='8' height='6'%3E%3Cpath d='M0 6h8L4 0z' fill='%23f0eee8'/%3E%3C/svg%3E");
}
html[data-theme="dark"][data-ground="graphite"] .spg{--spgLbl:#9b9890; --spgChip:#b2afa6; --spgPlate:linear-gradient(180deg,#3d3c3a,#2e2d2b); --spgFill:linear-gradient(180deg,#9d9b97,#74726d)}
html[data-theme="dark"][data-ground="graphite"] .fd{--fdLbl:#9b9890}

/* THE FOURTH GROUND — NAVY, "Insilico OG" (owner, 2026-11-06: ground-navy, N3 · Insilico OG, the owner's own shades).
   Four anchors are the owner's, sampled from Insilico OG itself: the panel #1f2737, the deck under it #171c28, the gutter
   between panels #16141a (near-black, a violet lean) and the panel's rims, a top edge #212834 and a lit bottom lip
   #29313e. Every other step is derived in OKLCH at the panel's hue (h≈264), chroma rising with lightness so no step
   greys out: well .200 → chart ground .217 → deck .227 → bank .245 → panel .273 → raised key .293 → popover .305 →
   hover .317 → current .325 → selected .333–.345. The steps above the panel are close because the panel is already
   light: the selected row is the ceiling at which the ask's lifted red still holds 3:1 (3.1), as do the orange (3.4),
   faint (3.7) and the focus ring, solid enough on navy to hold it (.9). Why N1 · Midnight's ladder stood here before
   (keep this): it was built from the name alone (#040d20 → #18263f), and the owner, shown the real colours, said its
   navy was not Insilico's. A popover stands one step above the plate it opens from (the owner: "each a distinct step"). */
html[data-theme="dark"][data-ground="navy"]{
  --ink:221,226,236; --litK:0.22; --shd:5,7,13; --shdK:1.6;
  --void:#171c28; --panel:#16141a; --panel2:#1f2737; --panel3:#1d2534; --raise:#232c3d;
  --well:#12161e; --well2:#151a23; --wellLite:#191f2b; --edge:#16141a; --dark:#0a0d14; --dark2:#04060a;
  --onDark:#eff2f8; --onDark2:rgba(239,242,248,.62);
  --text:#eceff5; --dim:#a9b1bf; --faint:#8892a5; --ghost:#5b6375; --prose:#c3cad7;
  --warnWash:#2b2717; --wkndWash:#2f2218;
  --plate:linear-gradient(180deg,#202838,#1e2636);
  --plateSh:0 1px 0 var(--edge),0 4px 10px rgba(var(--shd),.45),inset 0 1px 0 #212834,inset 0 -1px 0 #29313e;
  --pressSh:inset 0 2px 4px -1px rgba(var(--shd),1),inset 0 -6px 6px -6px rgba(255,255,255,.10),inset 0 -1px 0 rgba(255,255,255,.26);
  --segWell:#1a202d; --segWellSh:inset 0 1px 2px rgba(var(--shd),.7),inset 0 -1px 0 rgba(255,255,255,.05);
  --ring:rgba(var(--acc2RGB),.9);
  --chip:#262f41; --track:#2e394f;
  --plateHi:linear-gradient(180deg,#262f41,#232c3d); --plateHov:#283245; --plateCur:#2a3448;
  --veil:rgba(5,7,13,.6);
  --tovHold:rgba(23,28,40,.9); --tovRoom:#0c0e14;
  --frost:rgba(31,39,55,.88); --frostFlat:rgba(33,41,58,.95);
  --hudPlate:rgba(31,39,55,.82); --hudTick:linear-gradient(180deg,#4f5e7a,#323d52);
  --railSh:0 0 0 1px rgba(var(--lit),.07),0 6px 18px rgba(var(--shd),.55),inset 0 1px 0 var(--lip);
  --caret:url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='8' height='6'%3E%3Cpath d='M0 0h8L4 6z' fill='%23a9b1bf'/%3E%3C/svg%3E");
  --caretOn:url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='8' height='6'%3E%3Cpath d='M0 6h8L4 0z' fill='%23eceff5'/%3E%3C/svg%3E");
}
html[data-theme="dark"][data-ground="navy"] .spg{--spgLbl:#8f98a8; --spgChip:#a9b1bf; --spgPlate:linear-gradient(180deg,#323d54,#1e2636); --spgFill:linear-gradient(180deg,#929bab,#5d6f91)}
html[data-theme="dark"][data-ground="navy"] .fd{--fdLbl:#8f98a8}
html[data-theme="dark"][data-ground="navy"] .ds-pop:not([data-face]){background:linear-gradient(180deg,var(--chip),var(--raise))}
/* THE FIFTH GROUND — MIDNIGHT (owner, 2026-11-06: "ship both"): N1, the navy built from the name alone, kept as a ground
   of its own beside Insilico OG. Stepped ground → panel → raised key → popover → hover → selected, each a distinct navy
   at even steps, a popover one step above the plate it opens from; its literals are the ones navy wore until N3. */
html[data-theme="dark"][data-ground="midnight"]{
  --ink:219,223,229; --litK:0.2; --shd:0,3,14; --shdK:1.8;
  --void:#040d20; --panel:#02081a; --panel2:#111d34; --panel3:#0a152b; --raise:#18263f;
  --well:#010616; --well2:#030a1d; --wellLite:#081328; --edge:#000107; --dark:#00030f; --dark2:#000107;
  --onDark:#eff3fa; --onDark2:rgba(239,243,250,.62);
  --text:#e9edf3; --dim:#9ba3b1; --faint:#848ea0; --ghost:#596374; --prose:#bec6d4;
  --warnWash:#231e09; --wkndWash:#2a1a0c;
  --plate:linear-gradient(180deg,#15223a,#0c182e);
  --plateSh:0 2px 0 var(--edge),0 4px 10px rgba(var(--shd),.6),inset 0 1px 0 var(--lip);
  --pressSh:inset 0 2px 4px -1px rgba(var(--shd),1),inset 0 -6px 6px -6px rgba(255,255,255,.10),inset 0 -1px 0 rgba(255,255,255,.26);
  --segWell:#0d192f; --segWellSh:inset 0 1px 2px rgba(var(--shd),.7),inset 0 -1px 0 rgba(255,255,255,.05);
  --ring:rgba(var(--acc2RGB),.6);
  --chip:#1f2d48; --track:#2e3e5d;
  --plateHi:linear-gradient(180deg,#1f2d48,#142139); --plateHov:#18263f; --plateCur:#202f4a;
  --veil:rgba(0,3,14,.62);
  --tovHold:rgba(4,13,32,.9); --tovRoom:#010412;
  --frost:rgba(9,20,41,.88); --frostFlat:rgba(12,24,46,.95);
  --hudPlate:rgba(11,22,44,.82); --hudTick:linear-gradient(180deg,#435679,#253450);
  --railSh:0 0 0 1px rgba(var(--lit),.07),0 6px 18px rgba(var(--shd),.55),inset 0 1px 0 var(--lip);
  --caret:url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='8' height='6'%3E%3Cpath d='M0 0h8L4 6z' fill='%239ba3b1'/%3E%3C/svg%3E");
  --caretOn:url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='8' height='6'%3E%3Cpath d='M0 6h8L4 0z' fill='%23e9edf3'/%3E%3C/svg%3E");
}
html[data-theme="dark"][data-ground="midnight"] .spg{--spgLbl:#89919e; --spgChip:#a2a9b7; --spgPlate:linear-gradient(180deg,#23324e,#0f1b32); --spgFill:linear-gradient(180deg,#8c94a2,#52688f)}
html[data-theme="dark"][data-ground="midnight"] .fd{--fdLbl:#89919e}
html[data-theme="dark"][data-ground="midnight"] .ds-pop:not([data-face]){background:linear-gradient(180deg,var(--chip),var(--raise))}

/* =====================================================================
   THE LIGHT FAMILY — LINEN, Y's light (owner, 2026-11-06: "another theme for light mode, something that doesn't hurt
   the eye and is scientifically right color for the eyes. this is the new light mode"; v2: "less whites … a great
   color with premium and modern ui"; js/theme.js → DAYS).
   A member of the light family, never a mode of its own: `data-theme` stays "light", so every paper rule, `isDark()`,
   the light heat and the hues hold, and `data-ground="linen"` re-states only what the material changes. Paper (the
   :root above) stays a choice. Drawn for itself, not paper dimmed: an oat stone, ONE hue (OKLCH h 72) through every
   step, its chroma falling as the light rises (.017 in a well, .010 on the selected face), the way a lit matte
   surface desaturates; nothing is white. The steps a reader meets — ground → plate → raised → hover → selected — sit
   one even rung of OKLab L apart (.876 · .888 · .898 · .908 · .919), and the ground is held at .876 because below it
   the venue's own orange (never moved) falls under 3 : 1. The wells a chart or a book is drawn in sit at .903, under
   the hover: the largest field is never the brightest thing. Ink is a warm umber near-black (h 58), 10.5 : 1 on the
   ground and 12 : 1 on the brightest step; prose ≥ 8.4, faint ≥ 4.5. The plate is matte stone: a two-stop face, a warm
   lip, a hard warm edge and a soft warm pool (the shadow is umber, never grey). The bright orange is deepened and the
   ring opaque on this ground only (≥ 3 : 1 on every step); the warn gold is seated by theme.js → huesFor. A light rule
   that states a literal owes a linen twin (ds.css below; charts.js → GROUNDS.linen).
   ===================================================================== */
html[data-theme="light"][data-ground="linen"]{
  --ink:43,36,31; --lit:255,250,243; --litK:.62; --shd:52,36,20; --shdK:1.15;
  --acc2RGB:209,71,0; --accent2:#d14700; --accentEdge:#9c3a10;
  --void:#ddd5cb; --panel:#ded6cd; --panel2:#e0d9d1; --panel3:#ded7ce; --raise:#e2dcd5;
  --well:#d7cfc5; --well2:#d9d1c6; --wellLite:#e4ded6; --edge:#c5bcb1;
  --dark:#38312d; --dark2:#1d1713; --onDark:#eae5df; --onDark2:rgba(234,229,223,.66);
  --text:#2b241f; --dim:#504944; --faint:#635c57; --ghost:#867f79; --prose:#3b342f;
  --warnWash:#e0d7be; --wkndWash:#e9d3c1; --wkndInk:#9a5a26;
  --plate:linear-gradient(180deg,#e1dad3,#ded7ce);
  --plateTall:linear-gradient(180deg,#e1dad3,#dcd5cc);
  --plateSh:0 2px 0 var(--edge),0 1px 3px rgba(var(--shd),.07),0 8px 18px -6px rgba(var(--shd),.2),inset 0 1px 0 var(--lip);
  --plateShSm:0 2px 0 var(--edge),0 3px 8px -4px rgba(var(--shd),.16),inset 0 1px 0 var(--lip);
  --domWell:#e4ded7;
  --domWellSh:inset 0 1px 2px rgba(var(--shd),.14),inset 0 0 0 1px rgba(var(--ink),.075),0 1px 0 var(--lip);
  --ring:rgba(178,60,12,.95);
  --track:#c2b9ae;
  --plateHi:linear-gradient(180deg,#e4ded7,#e1dbd4); --plateHov:#e5e0d9; --plateCur:#e8e3dd;
  --veil:rgba(43,36,31,.3);
  --tovRoom:#a0978b; --tovHold:rgba(224,217,209,.93);
  --tovHoldSh:inset 0 1px 0 rgba(var(--lit),.45),0 0 0 1px rgba(var(--shd),.12),0 46px 90px -34px rgba(var(--shd),.5),0 0 0 200vmax var(--tovRoom);
  --tovCard:linear-gradient(180deg,#e8e3dd,#e3ddd5); --tovCardHov:#e9e4de; --tovCardCur:#eae5df;
  --tovCardSh:0 0 0 1px rgba(var(--shd),.1),0 1px 2px rgba(var(--shd),.1),0 14px 32px -12px rgba(var(--shd),.34),inset 0 1px 0 rgba(var(--lit),.55);
  --tovCardHiSh:0 0 0 1px rgba(var(--shd),.11),0 2px 4px rgba(var(--shd),.1),0 22px 46px -14px rgba(var(--shd),.42),inset 0 1px 0 rgba(var(--lit),.55);
  --frost:rgba(228,222,215,.92); --frostFlat:rgba(224,217,209,.95);
  --hudPlate:rgba(228,222,215,.86); --hudTick:linear-gradient(180deg,#8c857f,#69625d);
  --railSh:0 0 0 1px rgba(var(--ink),.08),0 6px 16px rgba(var(--shd),.16),inset 0 1px 0 var(--lip);
  --caret:url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='8' height='6'%3E%3Cpath d='M0 0h8L4 6z' fill='%23504944'/%3E%3C/svg%3E");
  --caretOn:url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='8' height='6'%3E%3Cpath d='M0 6h8L4 0z' fill='%232b241f'/%3E%3C/svg%3E");
}
/* the cross-section's card and its loads are a warm umber here, not paper's near-black: the darkest slab on the page
   stays one calm step from the stone (7.5 : 1, paper's is 13) */
html[data-theme="light"][data-ground="linen"] .spg{--spgLbl:#635c57; --spgChip:#4b4540; --spgPlate:linear-gradient(180deg,#423c37,#302a26); --spgFill:linear-gradient(180deg,#69625d,#3a342f)}
html[data-theme="light"][data-ground="linen"] .fd{--fdLbl:#635c57}
*{box-sizing:border-box;margin:0;padding:0}
/* a sideways stroke the page does not take is never the browser's back (v8.9: a Mac's two-finger swipe over a
   part of a view that took no wheel — a chart's rail, a gutter — went back a page and the view changed under the hand) */
html,body{height:100%;overscroll-behavior-x:none}
/* a moving panel is a live sheet (vtmorph.js → liftSheet · panelMove): a transform (in a flow, its margin) and a clip, a
   shadow on its moving edge, the desk under it laid out at its edge — v9 · Q108: no plate stands in for the desk */
.pn-sheet{z-index:30;will-change:transform,clip-path}
.pn-sheet[data-sheet="y"]{box-shadow:0 -12px 28px -14px rgba(var(--shd),calc(.34*var(--shdK) + .06))}
html.pn-grabbing,html.pn-grabbing *{cursor:grabbing!important;user-select:none!important}
/* A SMALL PUSH COMMITS (js/ui/padswipe.js → charge; motion.md → A PANEL'S PUSH COMMITS): along the edge that moves, a
   hairline in the ground's ink (v9 · owner, 2026-11-04: "remove the orange. no color highlight needed") fills from its middle as the push nears its commit, lights and goes when it commits, and
   draws back when the fingers lift short. Inside what carries the edge, on it (padcharge.js: it moves with the panel and
   is covered with it — v9 · Q160, fixed over the page it hung where the edge had been), transform and opacity only */
.pn-charge{position:absolute;z-index:40;pointer-events:none;border-radius:1px;opacity:0;transform-origin:50% 50%;will-change:transform,opacity;
  top:8px;bottom:8px;width:2px;background:linear-gradient(180deg,transparent,rgba(var(--ink),.5) 18%,rgba(var(--ink),.5) 82%,transparent)}
.pn-charge[data-edge="l"]{left:0}
.pn-charge[data-edge="r"]{right:0}
.pn-charge[data-edge="t"],.pn-charge[data-edge="b"]{top:auto;bottom:auto;left:8px;right:8px;width:auto;height:2px;background:linear-gradient(90deg,transparent,rgba(var(--ink),.5) 18%,rgba(var(--ink),.5) 82%,transparent)}
.pn-charge[data-edge="t"]{top:0}
.pn-charge[data-edge="b"]{bottom:0}
.pn-charge.dead{background:var(--dim);box-shadow:none}
.pn-charge.hit{filter:brightness(1.25)}
body{
  background:var(--void);
  color:var(--text); font:400 var(--fs)/1.45 var(--sans);
  display:grid; grid-template-rows:auto 1fr auto; grid-template-columns:minmax(0,1fr);
  height:100vh; overflow:hidden;
  -webkit-font-smoothing:antialiased;
}
/* the interface scale (js/ui/sizeclass.js) zooms the layout, not the viewport's own `vh`: the body is the window's height in the layout's units */
html[data-scale] body{height:calc(100vh / var(--uiz))}
.mono{font-family:var(--mono)} .dim{color:var(--dim)} .spacer{flex:1}
.pos{color:var(--bid)} .neg{color:var(--ask)} .warn{color:var(--warn)}
.b-ok{color:var(--text)} .b-warn{color:var(--warn)} .b-bad{color:var(--ask)}
b,strong{font-weight:600}
button{font:inherit;color:inherit;background:none;border:none;cursor:pointer}
input,select,textarea{
  font:inherit;color:var(--text);background:var(--well);
  border:none;border-radius:6px;padding:5px 8px;
  box-shadow:var(--wellSh);
  transition:box-shadow var(--tArrive) var(--ease)}
input:focus,textarea:focus{box-shadow:var(--wellSh),var(--editSh)}   /* the typing state (v8 S5); a select is a control: the keyboard ring only */
select{cursor:pointer}
/* v8.1 S7 · THE INSTRUMENT IS NOT TEXT. A drag across a panel, a double click
   on a figure or a long press on a phone selects nothing and opens no callout
   (the owner: "no one wants to copy this stuff"): every label, figure and
   canvas of the product is a control or a reading, and a blue band dragged
   over a book is noise. What IS text is given back: a field (an input, a
   textarea, anything editable) takes a caret, a selection and the system's
   callout, which iOS needs to focus it at all; and the manual's prose, on a
   fine pointer, where a desktop reader may quote a paragraph. Copying an
   address or a link is its own act (Copy address, Copy link). The landing
   (html[data-page="landing"], docs/contracts/landing.md) is a page to read
   and keeps the browser's own behaviour. */
html:not([data-page="landing"]){-webkit-user-select:none;user-select:none;-webkit-touch-callout:none}
input,textarea,[contenteditable]:not([contenteditable="false"]){-webkit-user-select:text;user-select:text;-webkit-touch-callout:default}
@media (pointer:fine){
  .dx-h1:not(y-),
  .dx-lede:not(y-),
  .dx-h2:not(y-),
  .dx-h3:not(y-),
  .dx-p:not(y-),
  .dx-small:not(y-),
  .dx-cap:not(y-),
  .dx-def:not(y-),
  .dx-note:not(y-),
  .dx-kw:not(y-),
  .dx-tbl:not(y-),
  .dx-steps:not(y-),
  :is(.dx-ann p){-webkit-user-select:text;user-select:text}
}

/* the grain sits UNDER the light, multiplying — on a dark ground it lifted */
.grain{position:fixed;inset:0;pointer-events:none;opacity:var(--grain);mix-blend-mode:var(--grainBlend);
  background-image:url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='160' height='160'%3E%3Cfilter id='n'%3E%3CfeTurbulence baseFrequency='.85' numOctaves='2'/%3E%3C/filter%3E%3Crect width='160' height='160' filter='url(%23n)' opacity='.4'/%3E%3C/svg%3E")}

/* ---- the engraved groove: every horizontal rule in the system ---- */
hr{border:0;height:1px;background:rgba(var(--shd),calc(.08*var(--shdK)));box-shadow:0 1px 0 rgba(var(--lit),calc(.6*var(--litK)))}

/* ---- a numeric readout beside a control is recessed, never bare ---- */
.vchip{display:inline-block;padding:5px 10px;border-radius:7px;
  background:var(--well);box-shadow:var(--wellSh);
  font:500 11px var(--mono);color:var(--text);text-align:right}

/* ---- a floating label over data is a dark chip: it must survive any ground.
   The canvas twin of this is darkChip() in charts.js — same shape, same
   reason. ---- */
.dchip{display:inline-flex;align-items:center;gap:6px;padding:3px 8px;border-radius:5px;
  background:var(--chip);box-shadow:0 3px 10px rgba(var(--shd),calc(.28*var(--shdK))),var(--chipRing);
  font:600 10px var(--mono);color:var(--onDark);white-space:nowrap}
.dchip small{font:500 10px var(--mono);color:var(--onDark2)}

/* ---- the engraved label: the single most-repeated element in the system ---- */
.seglbl,
.tr-h .t{
  font-family:var(--sans);
}

/* =====================================================================
   THE CONTROL FAMILY — one motion grammar for every clickable plate.

   Everything in the list below is an object you can push, so all of them
   arrive, travel, settle and throw identically. A control states what it
   IS (its surface, its type, its hue); this block states how it BEHAVES,
   and it is the only place that does. A component that re-declares its own
   transition has opted out of the system, which is almost always a bug.

   Two pseudo-elements carry the two shadow states a control needs, and
   only their OPACITY is animated:
     ::before  the PRESS — a plate in its own shadow, painted over the face.
               An inset shadow hugs the edges, so sitting above the label
               costs the label nothing.
     ::after   the PRESSED SWITCH — the "on" face, seated UNDER the ink at
               z-index:-1 (which is why the control carries z-index:0: a
               negative child needs its parent to be a stacking context).
   Neither is ever a layout box: both are absolutely positioned, so they
   cannot become a grid or flex item and shift the glyph they sit behind.
   ===================================================================== */

/* The trades opener is matched by .railopen, not #rail-open: one ID anywhere in
   this list would raise the whole family to ID specificity and outrank every
   component rule after it. That class exists for this reason alone. */
/* ONE SELECTOR A CLASS, NEVER ONE :is() OF THEM (frames-everywhere; tools/check-styles.mjs). The browser files a rule
   under its last compound's id, class, attribute or tag, and an :is() of many under none: such a rule was tried against
   every element on every page, each restyle (the family's eight rules alone ~3 ms of a view switch's style). Listed a
   class at a time, each is tried only where its class is. `:not(y-)` matches every element and keeps the family's one
   specificity (a class and a type, from `.seg button`, as :is() gave every member), so no rule after it moves. */
.btn:not(y-),
.ico:not(y-),
.vtab:not(y-),
.status:not(y-),
.chip:not(y-),
.hchip:not(y-),
.lanetog:not(y-),
.railopen:not(y-),
.spg-cat:not(y-),
.spg-rk:not(y-),
.menu-it:not(y-),
.fd-h:not(y-),
.fd-row:not(y-),
.dfz:not(y-){
  position:relative;z-index:0;
  /* ink, face and light on ARRIVE; travel on LEAVE. Four properties and no
     more: every var() here is re-resolved on every control whenever a root
     token changes. */
  transition:color var(--tArrive) var(--ease),
             background-color var(--tArrive) var(--ease),
             filter var(--tArrive) var(--ease),
             transform var(--tLeave) var(--settle);
}
.btn:not(y-)::before,
.ico:not(y-)::before,
.vtab:not(y-)::before,
.status:not(y-)::before,
.chip:not(y-)::before,
.hchip:not(y-)::before,
.lanetog:not(y-)::before,
.railopen:not(y-)::before,
.spg-cat:not(y-)::before,
.spg-rk:not(y-)::before,
.menu-it:not(y-)::before,
.fd-h:not(y-)::before,
.fd-row:not(y-)::before,
.dfz:not(y-)::before{
  content:"";position:absolute;inset:0;border-radius:inherit;pointer-events:none;
  opacity:0;box-shadow:var(--downSh);
  transition:opacity var(--tLeave) var(--settle);
}

/* ARRIVE — the face catches the light. Ink to full is each component's own
   business (it knows its resting colour); the light is the family's.
   hover:hover only, or a tap leaves a phone lit up until the next one. */
@media (hover:hover){
  .btn:not(y-):hover:not(:disabled),
  .ico:not(y-):hover:not(:disabled),
  .vtab:not(y-):hover:not(:disabled),
  .status:not(y-):hover:not(:disabled),
  .chip:not(y-):hover:not(:disabled),
  .hchip:not(y-):hover:not(:disabled),
  .lanetog:not(y-):hover:not(:disabled),
  .railopen:not(y-):hover:not(:disabled),
  .spg-cat:not(y-):hover:not(:disabled),
  .spg-rk:not(y-):hover:not(:disabled),
  .menu-it:not(y-):hover:not(:disabled),
  .fd-h:not(y-):hover:not(:disabled),
  .fd-row:not(y-):hover:not(:disabled),
  .dfz:not(y-):hover:not(:disabled){
    filter:brightness(1.045);
  }
}

/* TOUCH — down into the standoff, and the press shadow on. Instant in,
   because contact is instant; out on the LEAVE curve, because letting go
   is a release and a release settles. */
.btn:not(y-):active:not(:disabled),
.ico:not(y-):active:not(:disabled),
.vtab:not(y-):active:not(:disabled),
.status:not(y-):active:not(:disabled),
.chip:not(y-):active:not(:disabled),
.hchip:not(y-):active:not(:disabled),
.lanetog:not(y-):active:not(:disabled),
.railopen:not(y-):active:not(:disabled),
.spg-cat:not(y-):active:not(:disabled),
.spg-rk:not(y-):active:not(:disabled),
.menu-it:not(y-):active:not(:disabled),
.fd-h:not(y-):active:not(:disabled),
.fd-row:not(y-):active:not(:disabled),
.dfz:not(y-):active:not(:disabled){
  transform:translateY(var(--travel,2px));
  transition-duration:var(--tTouch);transition-timing-function:var(--contact);
}
.btn:not(y-):active:not(:disabled)::before,
.ico:not(y-):active:not(:disabled)::before,
.vtab:not(y-):active:not(:disabled)::before,
.status:not(y-):active:not(:disabled)::before,
.chip:not(y-):active:not(:disabled)::before,
.hchip:not(y-):active:not(:disabled)::before,
.lanetog:not(y-):active:not(:disabled)::before,
.railopen:not(y-):active:not(:disabled)::before,
.spg-cat:not(y-):active:not(:disabled)::before,
.spg-rk:not(y-):active:not(:disabled)::before,
.menu-it:not(y-):active:not(:disabled)::before,
.fd-h:not(y-):active:not(:disabled)::before,
.fd-row:not(y-):active:not(:disabled)::before,
.dfz:not(y-):active:not(:disabled)::before{
  opacity:1;transition-duration:var(--tTouch);transition-timing-function:var(--contact);
}

/* a WELL has nowhere to go: pressing one deepens it rather than moving it,
   which is the honest reading of a recess under a finger */
.status{-webkit-touch-callout:none;-webkit-user-select:none;user-select:none;--travel:0px;--downSh:inset 0 2px 5px rgba(var(--shd),calc(.26*var(--shdK)))}
/* a TINT on a plate is half a step up from the ground, so it travels half as far */
.ico,.lanetog,.menu-it{--travel:1px;--downSh:inset 0 1px 3px rgba(var(--shd),calc(.24*var(--shdK)))}
/* the two coloured plates press into their own hue, not into neutral shadow */
.btn.primary{--downSh:inset 0 2px 5px rgba(120,40,15,.42)}

/* THROW — a plate becoming a pressed switch. The "on" face dissolves in
   over the plate instead of replacing it, so the change reads as a switch
   being thrown rather than the page being repainted. A coloured switch
   states its fill as --onFill and inherits everything else. */
.chip:not(.y-)::after,
.hchip:not(.y-)::after,
.spg-cat:not(.y-)::after,
.menu-it:not(.y-)::after,
.ico.tog::after,
.dfz:not(.y-)::after{
  content:"";position:absolute;inset:0;z-index:-1;border-radius:inherit;pointer-events:none;
  opacity:0;background:var(--onFill,var(--dark));box-shadow:var(--onSh,var(--pressSh));
  transition:opacity var(--tState) var(--settle);
}
:is(.chip,.hchip,
   .spg-cat,.menu-it,
   .ico.tog,.dfz).on::after{
  opacity:1;
}

/* FOCUS — the ring, and only here. It is an outline rather than a shadow so
   it composes with whatever surface the control already is, and it never
   inherits the hover treatment: keyboard focus is a place, not a gesture. The ring shows only
   where the user moved focus (Tab, Shift+Tab, an arrow that moved it); focus a shortcut, Esc, Enter or a closing panel gives
   back is marked data-pf and not ringed (owner, 2026-10-31: the + after the new-tab panel). */
.btn:not(y-):focus-visible,
.ico:not(y-):focus-visible,
.vtab:not(y-):focus-visible,
.status:not(y-):focus-visible,
.chip:not(y-):focus-visible,
.hchip:not(y-):focus-visible,
.lanetog:not(y-):focus-visible,
.railopen:not(y-):focus-visible,
.spg-cat:not(y-):focus-visible,
.spg-rk:not(y-):focus-visible,
.fd-h:not(y-):focus-visible,
.fd-row:not(y-):focus-visible,
.dfz:not(y-):focus-visible,
a:not(.y-):focus-visible,
input:not(.y-):focus-visible,
select:not(.y-):focus-visible,
textarea:not(.y-):focus-visible{
  outline:2px solid var(--ring);outline-offset:2px;
}
:focus:not(:focus-visible){outline:none}
/* a click leaves no focus; rings are the keyboard's (js/ui/ds/overlay.js): while the pointer was the last input, nothing is ringed (hotfix-tabs: the mark is data-pf, motion.md) */
:root [data-pf]:focus-visible{outline:none}
/* v8 S5 · a field you TYPE in is never ringed: Chrome counts every focused
   text field as :focus-visible, mouse or not, so the ring above landed on
   every field a click reached. Its typing state is the hairline instead
   (--editSh). Checkboxes, radios, ranges and file pickers are controls and
   keep the ring. Anything the list above does not name still gets OUR ring
   rather than the browser's system-coloured one. */
input:not([type=checkbox],[type=radio],[type=range],[type=file],[type=button],[type=submit],[type=color]):focus-visible,
textarea:not(.y-):focus-visible{outline:none}
:where(button):focus-visible,:where([role=button]):focus-visible,:where([tabindex]):focus-visible{outline:2px solid var(--ring);outline-offset:2px}

/* DISABLED — a control that cannot be used does not acknowledge, does not
   travel, and does not animate on its way to saying so. */
.btn:not(y-):disabled,
.ico:not(y-):disabled,
.vtab:not(y-):disabled,
.status:not(y-):disabled,
.chip:not(y-):disabled,
.hchip:not(y-):disabled,
.lanetog:not(y-):disabled,
.railopen:not(y-):disabled,
.spg-cat:not(y-):disabled,
.spg-rk:not(y-):disabled,
.menu-it:not(y-):disabled,
.fd-h:not(y-):disabled,
.fd-row:not(y-):disabled,
.dfz:not(y-):disabled{
  transition:none;filter:none;transform:none;
}
.btn:not(y-):disabled::before,
.ico:not(y-):disabled::before,
.vtab:not(y-):disabled::before,
.status:not(y-):disabled::before,
.chip:not(y-):disabled::before,
.hchip:not(y-):disabled::before,
.lanetog:not(y-):disabled::before,
.railopen:not(y-):disabled::before,
.spg-cat:not(y-):disabled::before,
.spg-rk:not(y-):disabled::before,
.menu-it:not(y-):disabled::before,
.fd-h:not(y-):disabled::before,
.fd-row:not(y-):disabled::before,
.dfz:not(y-):disabled::before{
  transition:none;opacity:0;
}

/* ------------------------------ buttons ------------------------------ */
.btn{
  background:var(--plate);border:none;border-radius:8px;padding:7px 13px;
  font:600 12px var(--sans);letter-spacing:0;text-transform:none;color:var(--dim);
  box-shadow:var(--plateShSm)}
.btn:hover{color:var(--text)}
.btn.primary{
  background:linear-gradient(180deg,var(--accentHi),var(--accentLo));color:#fff3ee;
  box-shadow:0 2px 0 var(--accentEdge),0 5px 12px rgba(178,63,24,.22),inset 0 1px 0 rgba(var(--lit),calc(.34*var(--litK)))}
.btn.primary:hover{color:#fff}
.ico{
  width:22px;height:22px;display:inline-grid;place-items:center;
  color:var(--dim);font-size:12px;border-radius:6px;line-height:1;
  background:rgba(var(--ink),.05)}
.ico:hover{color:var(--text);background:rgba(var(--ink),.11)}

/* (the switch bank of plates that pressed in, `.seg`, is gone: every bank is the kit's, `.ds-seg`, its chosen face on
   the lit thumb that slides — owner, 2026-11-10 · design-kit-d2. It took --segWell because the well had to be light
   enough to cut a BLACK face into on matt black) */

/* =====================================================================
   THE DROP MENU — the one surface in this app that used to be the
   operating system's.

   A closed select is a plate with an engraved caret. While its menu is
   open the control is IN HAND, as every key of a head is: its own face
   kept, its words in full ink, the caret turned to point at the menu.
   Until 2026-10-29 open was a pressed black switch, and on paper that is a
   hole punched in the bar; where the bar's hover cleared its face the
   owner saw a grey slab with its words ghosted, read as disabled.
   The menu itself is a raised plate on the ground holding rows that arrive
   and settle like buttons; ONE lit plate travels to the row under the
   pointer or the keys; the chosen row is the selected row of every list
   (the lifted plate, css/ds.css → THE SELECTED ROW) with the answer's
   check at its end. No new hue, no new type, no new shadow.

   js/ui/menu.js drives it from one delegated listener; the <select> is
   still the state and still what fires `change`. See that file's header.
   ===================================================================== */
:root{
  --caret:url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='8' height='6'%3E%3Cpath d='M0 0h8L4 6z' fill='%234a4a48'/%3E%3C/svg%3E");
  /* open turns the caret to point at the menu, in full ink (a select cannot
     carry a mask, so each ground states its two carets: the dark ones below) */
  --caretOn:url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='8' height='6'%3E%3Cpath d='M0 6h8L4 0z' fill='%231a1a1a'/%3E%3C/svg%3E");
  /* a direction arrow, carried as a MASK so it takes the control's own ink and
     answers hover with it. One glyph: ascending is the same arrow turned. */
  --arrowDn:url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' viewBox='0 0 9 11'%3E%3Cpath d='M3.2 0h2.6v5.6H8L4.5 10.6 1 5.6h2.2z'/%3E%3C/svg%3E");
}
/* on black the caret is --dim's ink at rest and --text's open: the light
   ground's #4a4a48 caret vanished into a dark well */
html[data-theme="dark"]{
  --caret:url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='8' height='6'%3E%3Cpath d='M0 0h8L4 6z' fill='%239e9c94'/%3E%3C/svg%3E");
  --caretOn:url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='8' height='6'%3E%3Cpath d='M0 6h8L4 0z' fill='%23edebe5'/%3E%3C/svg%3E");
}
/* the caret is the control admitting it opens something. Every select in
   the product carries it, at the same size, in the same place. */
select{
  -webkit-appearance:none;appearance:none;
  padding-right:20px;
  background-image:var(--caret);background-repeat:no-repeat;
  background-position:right 7px center}
/* OPEN is in hand: the face it has, its words in full ink, the caret
   turned. A select that composes its own face (a well, a plate) keeps it
   and takes the hand's hairline; one standing bare in a head takes the
   head's wash from its key (css/wall.css → .wb-sort). */
select.menu-open{color:var(--text);background-image:var(--caretOn)}

.menu-host{position:fixed;z-index:190}
.menu{
  position:relative;
  min-width:132px;max-width:min(340px,92vw);overflow:auto;outline:none;
  display:flex;flex-direction:column;gap:2px;padding:5px;border-radius:11px;
  background:var(--plateTall);
  box-shadow:0 3px 0 var(--edge),0 20px 44px rgba(var(--shd),calc(.24*var(--shdK))),inset 0 1px 0 var(--lip)}
/* THE CURSOR — one lit plate under the row the pointer or the keys are on,
   travelling on the spring by transform alone (js/ui/menu.js → paintCur),
   the same plate as .ds-menu-lit. The keys' cursor is this plate too: a
   list walked by a travelling plate carries no ring on its rows. */
.menu-lit{position:absolute;left:5px;right:5px;top:0;height:0;border-radius:6px;pointer-events:none;opacity:0;
  background:rgba(var(--ink),.06);transition:transform .3s var(--spring),width .3s var(--spring),opacity var(--tArrive) var(--ease)}
.menu-lit.on{opacity:1}
/* a row is a control, so it takes the control family's arrive / touch /
   throw wholesale — this block only says what it IS. Its THROW face is the
   selected row's lifted plate, never a hue: the list says what is chosen by
   the plate and the check, and keeps orange for the check alone. */
.menu-it{
  display:flex;align-items:center;gap:10px;width:100%;text-align:left;
  padding:6px 9px 6px 10px;border-radius:6px;white-space:nowrap;
  font:500 11px var(--mono);letter-spacing:0;color:var(--dim);
  background:transparent;
  --onFill:var(--selFace);--onSh:var(--selSh)}
.menu-it.cur,.menu-it.on{color:var(--text)}
.menu-it span{flex:1;overflow:hidden;text-overflow:ellipsis}
/* THE CHECK — the answer's mark at the chosen row's end, in the answer's
   hue: the stroke of the checkbox (.ds-chk-b svg), drawn in as the menu
   arrives */
.menu-ck,.ds-mck{--is:12px;flex:none;color:var(--accent2);stroke-width:2.4;stroke-dasharray:22;stroke-dashoffset:0;
  animation:menuCk var(--tState) var(--settle) .08s backwards}
@keyframes menuCk{from{stroke-dashoffset:22}}
.menu-it:disabled{opacity:.4;cursor:default}
/* A FAMILY ROW (js/ui/menu.js → addOptions): its name, then its windows as keys; the chosen key the selected plate,
   the name in full ink and the check at the row's end, as a chosen row's */
.menu-fam{display:flex;align-items:center;gap:var(--sp8);padding:0 9px 0 10px;min-height:25px;white-space:nowrap}
.menu-famn{flex:1;font:500 11px var(--mono);letter-spacing:0;color:var(--dim)}
.menu-fam.on .menu-famn,.menu-fam:has(.cur) .menu-famn{color:var(--text)}
.menu-keys{display:flex;gap:2px;margin-right:-4px}
.menu-it.menu-k{width:auto;padding:6px 7px;justify-content:center}
.menu-fam>.menu-ck{margin-left:2px}
.menu-fam:not(.on){padding-right:31px}
/* A HELD KEY (js/ui/menu.js → A HELD OPTION): past the reader's plan, its word faint, never the cursor's plate; the row
   ends on the plan that opens it, the gate's own chip (gate.js), read as one key with the row */
.menu-it.menu-held{color:var(--faint)}
.menu-it.menu-held:hover{color:var(--dim)}
.menu-fam.held:not(.on){padding-right:5px}
/* (owner, 2026-11-05) the family's name is a press: its key in force or its first. A key may wear its order's glyph —
   ↑ the most first, ↓ the least, ↕ either way — in the legend's ink, the key's own under the hand and once chosen */
.menu-famp{cursor:pointer}
@media (hover:hover){ .menu-famp:hover{color:var(--text)} }
.menu-it.menu-k:has(>.menu-ki){gap:4px;padding-left:6px}
.menu-ki{--is:10px;flex:none;color:var(--faint);stroke-width:2.2;transition:color var(--tArrive) var(--ease)}
.menu-it.cur>.menu-ki,.menu-it.on>.menu-ki{color:currentColor}
.menu-hm{display:inline-flex;margin-left:4px;cursor:pointer}
.menu-hm>.gt-chip{pointer-events:none}
/* (v9 · Q213) A WORD'S MENU (js/ui/menu.js → data-menu="word"): a sort names its order in the head's sans, so its rows
   and its families are that face too; a window stays a key. Until Q213 the rows were mono under a sans name */
.menu[data-face="word"] .menu-it,.menu[data-face="word"] .menu-famn{font:500 12px/1.3 var(--sans);letter-spacing:0}
.menu[data-face="word"] .menu-it.menu-k{font-size:12px}

/* an optgroup label is the system's engraved legend, nothing else — with the
   groove that makes it a division rather than a caption */
.menu-grp{padding:7px 10px 4px 10px;
  font:500 11px var(--sans);letter-spacing:.005em;text-transform:none;color:var(--faint)}
.menu-grp:not(:first-child){margin-top:4px;padding-top:10px;
  box-shadow:inset 0 1px 0 rgba(var(--shd),calc(.07*var(--shdK))),inset 0 2px 0 rgba(var(--lit),calc(.7*var(--litK)))}


/* ------------------------------- top bar ----------------------------- */
/* One row, one height, and no wrapping: every control in the bar stands on
   --hdrH, and what does not fit is shed rather than folded onto a second row
   (js/ui/header.js). `overflow:hidden` is the guard for the one frame between
   a control growing and the bar measuring it again. */
#top{--hdrH:30px;--hdrMid:200px;   /* the middle the island keeps (v9 · Q186; js/ui/header.js → widthOf) */
  display:flex;align-items:center;flex-wrap:nowrap;gap:0 10px;padding:12px 16px;min-width:0;
  height:54px;overflow:hidden;
  background:var(--void);box-shadow:0 1px 0 rgba(var(--ink),.07)}
/* THE FULL-SCREEN APP'S TOP (pwa-fullscreen-inset, 2026-11-01; foundations.md). Installed and in macOS full screen,
   Chrome keeps the window's top ~31 px for its toolbar's reveal: the page never hears the pointer there (clientY 3–31,
   the real pointer on Chrome 156), and half the bar, the island's pill with it, was dead. There the bar
   stands 32 window px lower on its own ground (--appTop: the window's px whatever the interface scale), and a sheet
   that rises from the top keeps clear of it. Never windowed, and never in Y's own whole screen (the Fullscreen API:
   html is :fullscreen, and Chrome draws no strip over it) */
html{--appTop:0px}
@media (display-mode:fullscreen){
  html:not(:fullscreen):not([data-phone]){--appTop:calc(32px / var(--uiz,1))}
  html:not(:fullscreen):not([data-phone]) #top{height:calc(54px + var(--appTop));padding-top:calc(12px + var(--appTop))}
  html:not(:fullscreen):not([data-phone]) #hdr-isl{top:var(--appTop)}     /* the island's seat: the bar's row, under the band */
}
/* #hdr-tools is `display:contents` (css/mobile.css), so its two zones are the
   bar's own flex items: nothing in the bar shrinks, or a zone's content spills
   out of its box under the zone beside it instead of being shed. */
#top>*,#hdr-tools>*,.hdr-ctx>*,.hdr-acts>*{flex:none}

/* THE MARK — the wordmark's own letter, held in a plate. A lowercase y in
   Geist 700, --accent2 orange (the hue this system reserves for an answer)
   on --panel2 paper, inside a 2px ink border. It is drawn from the real
   glyph outline, not a <text> element, so it is identical everywhere and
   needs no font to render. The border is the one place in this design system
   where a border is correct rather than a groove: the mark is an object with
   an edge, not a region of the panel. It does not animate — the LED lives on
   the status pill, which is where "alive, now" belongs. */
.ymark{width:22px;height:22px;flex:none;display:block}

/* ---- the asset mark ------------------------------------------------
   Same object as the Y mark, one rung down: a plate with a hard 2px edge,
   holding artwork instead of a letter. QFEX draws an icon for every market
   it lists and it is baked into js/data/marks.js; the art runs full-bleed
   and the edge paints over it, so 180 logos share one silhouette. A market
   QFEX has no vector for wears its ticker in the same plate.

   The edge is an inset ring rather than a border for exactly that reason —
   a border would push the art inward and the tile would stop being a tile.
   The mark never appears on a canvas: those surfaces already spend colour
   on bid, ask and out-of-band (CLAUDE.md). The tape holds it at a third of
   its saturation until a print crosses its book's minimum (js/ui/tapeart.js →
   markArt's dull cut, on its canvas rows). */
.amk{flex:none;position:relative;display:grid;place-items:center;overflow:hidden;
  border-radius:22%;background:var(--panel2);color:var(--text);font-style:normal}
/* the edge sits ON the artwork — an inset box-shadow would be painted under
   a full-bleed tile and the mark would lose the thing that makes it an object */
.amk::after{content:"";position:absolute;inset:0;border-radius:inherit;pointer-events:none;
  box-shadow:inset 0 0 0 var(--amkEdge,2px) var(--mkEdge,var(--text))}
.amk svg{width:100%;height:100%;display:block}
/* a bare glyph with no tile of its own needs the room a tile would have
   given it, or it grows to the plate's edge and fights the mark's own rule */
.amk svg.inset{width:66%;height:66%;color:var(--text)}
.amk.mono{font:700 var(--amkFs,8px)/1 var(--sans);letter-spacing:.04em;color:var(--dim)}
/* a venue tile that is only its ticker (mark.js → WORD): Y's two characters on the venue's colour, in its ink */
.amk.mono.word{background:var(--amkTile);color:var(--amkInk);letter-spacing:.02em}
.amk-xs{width:15px;height:15px;--amkEdge:1.5px;--amkFs:6.5px}
.amk-sm{width:19px;height:19px;--amkEdge:2px;--amkFs:8px}
.amk-lg{width:30px;height:30px;--amkEdge:2px;--amkFs:12px}
/* the two rungs the cross-section's stack and ranking are set at */
.amk-2xs{width:12px;height:12px;--amkEdge:1.5px;--amkFs:5.3px}
.amk-13{width:13px;height:13px;--amkEdge:1.5px;--amkFs:5.7px}
/* a market QFEX has switched off keeps its mark but loses its colour —
   the row is telling you it is not quotable, and the mark should agree */
.amk.off{filter:grayscale(1);opacity:.55}

/* ---- the sector mark (js/ui/sectormark.js) -------------------------
   Ours, not the venue's: a hairline engraved into whatever it sits on.
   One stroke weight held at device width by `vector-effect` on every shape,
   butt caps and miter joins, and no colour of its own — currentColor is the
   legend beside it, so a thrown switch re-inks the mark with its label.
   The seat is the one lit hairline under the cut (--smkSeat), and on a
   pressed switch or a dark chip it moves to the top edge (--smkSeatOn).
   It is never a canvas mark, for the reason the asset mark gives. Size is
   the surface's: --smk, 22px unless it says otherwise. */
.smk{flex:none;display:block;width:var(--smk,22px);height:var(--smk,22px);overflow:visible;
  fill:none;stroke:currentColor;stroke-width:1.5;stroke-linecap:butt;stroke-linejoin:miter;
  filter:var(--smkSeat);pointer-events:none}
.spg-cat.on>.smk,.spg-lab:not(.bench)>.smk{filter:var(--smkSeatOn)}
/* the Docs specimen: the whole set, each on its own plate, in SECTOR_ORDER */
.smkset{display:grid;grid-template-columns:repeat(auto-fill,minmax(168px,1fr));gap:8px;padding:14px 4px}
.smkspec{display:flex;align-items:center;gap:12px;min-width:0;padding:12px 13px;border-radius:9px;
  background:var(--plate);box-shadow:var(--plateShSm);color:var(--dim)}
/* the legend is the plate's own ink, upright — .manual em would set it in italic --text */
.smkset .smkspec>em{min-width:0;font:600 12px var(--sans);letter-spacing:0;text-transform:none;
  font-style:normal;color:inherit}

/* ---- the favourite star (js/ui/fav.js) -----------------------------
   One star for every surface that names a market, and one set behind it.
   It is NOT a plate: it has no face to press and no switch to throw, so it
   takes the control family's TIMING and none of its surfaces — ink arrives,
   the star gives under a press and settles back. Unlit it is an outline in
   ghost ink, quiet enough to read past on a row of forty; lit it is the one
   --accent2 object on its plate, seated with the hard bottom edge every
   raised face in this system has. It pops when it lights (fav.js), and the
   ring that leaves it is its own orange. Starring never moves the row. */
/* `fav` IS THE COMPONENT, NOT A STATE WORD. The rule below sizes a box, so
   anything else that wore the class — a row, a chip — collapsed to an 18px
   square (the cross-section's right-edge chips did, for a release). A surface
   that marks "this one is a favourite" names the state itself: `.starred`. */
.fav{flex:none;position:relative;display:inline-grid;place-items:center;
  width:var(--favBox,18px);height:var(--favBox,18px);margin:0;padding:0;border-radius:6px;
  color:var(--ghost);background:transparent;cursor:pointer;-webkit-tap-highlight-color:transparent;
  transition:color var(--tLeave) var(--settle),transform var(--tLeave) var(--settle)}
.fav svg{width:var(--favS,12px);height:var(--favS,12px);display:block;overflow:visible;
  fill:rgba(var(--lit),calc(0*var(--litK)));stroke:currentColor;stroke-width:1.4;stroke-linejoin:round;
  transition:fill var(--tState) var(--settle),stroke var(--tState) var(--settle),filter var(--tState) var(--settle)}
.fav-xs{--favBox:15px;--favS:10px}
.fav-sm{--favBox:18px;--favS:12px}
@media (hover:hover){
  .fav:hover{color:var(--dim);transition-duration:var(--tArrive)}
  .fav.on:hover{color:var(--accentHi)}
}
.fav:active{transform:scale(.84);transition-duration:var(--tTouch);transition-timing-function:var(--contact)}
.fav.on{color:var(--accent2)}
.fav.on svg{fill:currentColor;stroke:currentColor;filter:var(--favSeat)}
/* THE FLARE — the light that leaves a star is the STAR.
   A halo here cannot be a ring: the tightest row a star sits in is 22px with
   its overflow hidden (.csym), so a circle grown to half again its size came
   back as two arcs either side of the glyph. So the flare is the glyph's own
   silhouette lifting off it and fading, inside its own footprint, where
   nothing can clip it — masked with the path js/ui/fav.js publishes as
   --favMask, which is the one statement of that shape in the product.
   It cannot paint before the mask is set: a flare only runs on a toggle, and
   a toggle only happens through the listener that sets it. */
.fav::after{content:"";position:absolute;pointer-events:none;opacity:0;
  inset:calc((var(--favBox,18px) - var(--favS,12px)) / 2);
  background:linear-gradient(100deg,rgba(var(--lit),0) 32%,rgba(var(--lit),.78) 50%,rgba(var(--lit),0) 68%) 130% 0/300% 100% no-repeat;
  -webkit-mask:var(--favMask) center/contain no-repeat;mask:var(--favMask) center/contain no-repeat}
/* (v9 · watch-star-shimmer: one light crosses the star as it fills, inside its own shape; it was the shape lifting off
   and fading, a pulse — motion.md → NOTHING PULSES) */
.fav.struck::after{opacity:1;animation:favGlint .6s var(--sheen) .05s both}
@keyframes favGlint{from{background-position:130% 0}to{background-position:-30% 0}}
:root[data-motion] .fav.struck::after{animation:none;opacity:0}
.fav:focus-visible{outline:2px solid var(--ring);outline-offset:1px}
:root[data-motion] .fav:active{transform:none}
/* A SECTOR'S STAR (v9 · Q84; fav.js → sectorStarHTML) sits on a chip that is itself a filter: it keeps its room, so
   lighting one never moves the chip except by the re-order; unlit it shows only under the hand or the keyboard, lit it
   is the chip's one orange */
.fav-sec{margin:0 -5px 0 -2px}
.fav-sec:not(.on){opacity:0;transition:opacity var(--tState) var(--settle)}
:hover>.fav-sec,:focus-visible>.fav-sec,.fav-sec:focus-visible{opacity:1}

/* =====================================================================
   THE TOP BAR — three zones on one line, and it never wraps.

   WHERE YOU ARE        the mark, then the views. Nothing to their left or
                        right changes with the page, so the views never move.
   WHAT SHAPES THIS PAGE  the page's own tools, straight after the views and
                        behind one engraved groove: the wall's span, grouping
                        and lens (#hdr-ctx). It shows only on its pages.
                        (The cross-section's went to its own head in v9 · Q12,
                        Funding's in v9 · Q10.)
   WHAT THE PRODUCT DOES  the same on every page, right-aligned: Markets, the
                        one orange action in the bar; Tour as a quiet
                        instrument; the feed's status; Settings.

   HIERARCHY IS WEIGHT, NOT SIZE. Every control in the bar is the same height
   (--hdrH), so it reads as one line of instruments; what separates them is how
   much each one weighs. The orange plate is the action. The views and the
   instrument are raised plates. A page's switches are FLAT in their well until
   one is chosen — eleven raised faces in a row read as eleven things to press,
   which is not what a bank of switches is. The status is a well, and the clock
   is bare type.

   AND IT SHEDS BY MEASUREMENT (js/ui/header.js), not by width breakpoints. A
   breakpoint cannot know that the feed's status went from LIVE to OFFLINE —
   CLOSED, or that the wall changed face and closed its span and grouping: the
   bar used to wrap onto a second row for exactly those reasons, and a second
   row moves every plate under it.
   So a ResizeObserver watches the bar and everything in it that can change
   width, and when the row runs out the bar drops the next thing on the list
   below (`hs-*`), in the order it can spare them; they come back in reverse as
   room returns. A page's own controls can join the list with `data-shed`.
   Below 720px the phone layer folds the tools behind ☰ (css/mobile.css).
   ===================================================================== */
.brand{
  display:inline-flex;align-items:center;gap:8px;height:var(--hdrH);padding:0 12px 0 4px;border-radius:9px;
  background:var(--plate);box-shadow:var(--plateShSm);
  font:700 11px var(--sans);letter-spacing:.2em;text-transform:lowercase;color:var(--text);
  white-space:nowrap;user-select:none}

/* ---- the views ----------------------------------------------------
   A bank of tabs, and the one you are on is a raised plate in the well. The
   plate is a single INDICATOR that travels between tabs (js/ui/header.js): a
   switch that appears somewhere else is a repaint, and where you just came
   from is worth the third of a second it takes to see. It carries the accent
   underline with it, and it re-seats without travelling whenever the bar
   itself changes shape. */
#tabs{position:relative;display:flex;align-items:stretch;gap:2px;height:var(--hdrH);padding:3px;
  border-radius:9px;background:var(--well);box-shadow:var(--wellSh)}
.vtab{position:relative;display:inline-flex;align-items:center;padding:0 14px;border-radius:6px;
  font:600 12px var(--sans);letter-spacing:0;text-transform:none;
  color:var(--dim);background:transparent;white-space:nowrap}
.vtab[hidden]{display:none}
.vtab:hover{color:var(--text)}
.vtab.on{color:var(--text);background:var(--plate);box-shadow:var(--plateShSm)}
.vtab.on::after{content:"";position:absolute;left:50%;bottom:3px;transform:translateX(-50%);
  width:14px;height:2px;border-radius:1px;background:var(--accent2)}
/* (v8.7) A PAGE WHOSE CODE IS STILL ON ITS WAY (main.js → waitTab): its tab draws the tick it will
   wear as a faint track, the accent running through it, until the page is there */
.vtab[data-wait]:not(.on)::after{content:"";position:absolute;left:50%;bottom:3px;width:14px;height:2px;margin-left:-7px;border-radius:1px;
  background:linear-gradient(90deg,rgba(var(--acc2RGB),0),var(--accent2) 50%,rgba(var(--acc2RGB),0)) no-repeat,rgba(var(--ink),.14);
  background-size:7px 100%,100% 100%;animation:vtab-wait .9s linear infinite}
@keyframes vtab-wait{from{background-position:-7px 0,0 0}to{background-position:14px 0,0 0}}
:root[data-motion] .vtab[data-wait]:not(.on)::after{animation:none;background-position:3px 0,0 0}
/* with the indicator in the well the tab itself carries no face: it would be
   a second plate under the one that travels */
#tabs.ind .vtab.on{background:transparent;box-shadow:none}
#tabs.ind .vtab.on::after{display:none}
/* the tabs sit ON the plate that travels under them. The control family's own
   `z-index:0` is stated through an :is() list that carries a (0,1,1) selector
   in it, so this has to be at least as specific to be the later word. */
#tabs .vtab{z-index:1}
.vtab-ind{position:absolute;left:0;top:3px;bottom:3px;width:0;border-radius:6px;pointer-events:none;
  transform-origin:0 50%;background:var(--plate);box-shadow:var(--plateShSm)}
.vtab-ind b{position:absolute;left:50%;bottom:3px;transform:translateX(-50%);
  width:14px;height:2px;border-radius:1px;background:var(--accent2)}

/* (v9 · Q140) THE BAR IS THE FIRST TIER OF ONE CHROME (css/ds.css → THE HEADS): the views are words on the deck —
   no well round them, sentence case — and the one you are on stands on THE THUMB, the same quiet plate every head's
   choice wears, carrying the one orange tick: orange says where you are. Until Q140 the views sat in a grey well in
   tracked capitals, a raised plate in it, and the page heads under it spoke a second language */
#tabs{gap:0;padding:var(--padBankSm);border-radius:var(--rBank);background:transparent;box-shadow:none}
.vtab{padding:0 13px;border-radius:calc(var(--rBank) - var(--padBankSm));font:500 12px var(--sans);letter-spacing:0;text-transform:none;color:var(--dim)}
.vtab.on{font-weight:600}
/* (v9 · Q192) under the hand a tab lights no box of its own: one plate glides tab to tab beneath the sheet (js/ui/handplate.js →
   glideKeys; css/shell.css → .hz-wash). Until Q192 each tab lit its own box, and the light jumped tab to tab */
#tabs .hz-wash{--hzR:calc(var(--rBank) - var(--padBankSm))}
.vtab-ind{top:2px;bottom:2px;border-radius:calc(var(--rBank) - var(--padBankSm));background:var(--thumb);box-shadow:var(--thumbSh)}
.vtab-ind b{bottom:2px;width:12px}

/* the views are LINKS (index.html → #tabs): an address the browser can open
   in a tab of its own. They wear the tab's face, never a link's. */
a.vtab{text-decoration:none;cursor:pointer;user-select:none;-webkit-user-select:none;
  -webkit-touch-callout:none;-webkit-user-drag:none}
/* the tab a menu is open for keeps a hairline of the answer hue round it, so
   which view the menu speaks for is never a guess */
.vtab.tm-src{color:var(--text)}
.vtab.tm-src::before{content:"";position:absolute;inset:1px;border-radius:5px;pointer-events:none;
  box-shadow:inset 0 0 0 1px rgba(var(--acc2RGB),.6)}

/* ---- the views' own menu (js/ui/tabmenu.js) ------------------------
   A raised plate that opens out of the press. Its head is the DARK answer
   plate — which view, and the address a new tab would open at — and its rows
   sit in one well with one lit plate travelling between them on the spring,
   the same object as the indicator in the tabs above. */
.tabmenu{position:fixed;z-index:195;width:244px;padding:5px;border-radius:12px;outline:none;
  user-select:none;-webkit-user-select:none;
  background:var(--plateTall);
  box-shadow:0 3px 0 var(--edge),0 22px 48px rgba(var(--shd),calc(.26*var(--shdK))),inset 0 1px 0 var(--lip)}
.tm-head{display:grid;grid-template-columns:1fr auto;align-items:center;gap:5px 8px;
  padding:9px 11px 10px 12px;border-radius:8px;
  background:var(--dark);color:var(--onDark);box-shadow:var(--pressSh)}
.tm-name{display:inline-flex;align-items:center;gap:8px;
  font:600 12px var(--sans);letter-spacing:0;text-transform:none}
.tm-led{flex:none;width:6px;height:6px;border-radius:50%;background:var(--faint)}
.tm-led.on{background:var(--accent2);
  box-shadow:0 0 0 2px rgba(var(--acc2RGB),.22),0 0 8px rgba(var(--acc2RGB),.75)}
.tm-here{font:600 10px var(--mono);font-style:normal;letter-spacing:0;text-transform:none;
  color:var(--accent2)}
.tm-addr{grid-column:1/-1;min-width:0;overflow:hidden;text-overflow:ellipsis;white-space:nowrap;
  font:500 10px var(--mono);letter-spacing:0;color:var(--onDark);opacity:.6}
.tm-rows{position:relative;display:flex;flex-direction:column;gap:1px;margin-top:5px;padding:3px;
  border-radius:9px;background:var(--well);box-shadow:var(--wellSh)}
.tm-lit{position:absolute;left:3px;right:3px;top:0;height:0;border-radius:6px;pointer-events:none;
  opacity:0;background:var(--plate);box-shadow:var(--plateShSm);
  transition:transform .34s var(--spring),height .34s var(--spring),opacity var(--tArrive) var(--ease)}
/* the lit plate carries nothing at its edge (v8): the orange tick that stood on
   its left side was the mark the owner called ugly wherever a selection wore it */
.tm-lit.on{opacity:1}
.tm-lit.seat{transition:none}
.tm-it{position:relative;z-index:1;display:flex;align-items:center;gap:9px;width:100%;
  padding:7px 8px 7px 13px;border-radius:6px;text-align:left;white-space:nowrap;
  font:500 11px var(--mono);letter-spacing:0;color:var(--dim);background:transparent;
  transition:color var(--tArrive) var(--ease)}
.tm-it.cur,.tm-it.done{color:var(--text)}
.tm-it:disabled{opacity:.42;cursor:default}
.tm-it:focus-visible{outline:none}
.tm-ic{flex:none;display:grid;place-items:center;width:14px;height:14px;
  transition:color var(--tArrive) var(--ease)}
.tm-ic svg{width:14px;height:14px;fill:none;stroke:currentColor;stroke-width:1.4;
  stroke-linecap:round;stroke-linejoin:round}
.tm-it.cur .tm-ic,.tm-it.done .tm-ic{color:var(--accent2)}
.tm-lbl{flex:1;min-width:0;overflow:hidden;text-overflow:ellipsis}
.tm-it kbd{flex:none;padding:2px 5px;border-radius:4px;
  font:600 10px var(--mono);letter-spacing:0;color:var(--faint);
  background:var(--raise);box-shadow:0 1px 0 var(--edge),inset 0 1px 0 var(--lip)}
.tm-sep{display:block;height:1px;margin:3px 9px;
  background:rgba(var(--shd),calc(.12*var(--shdK)));box-shadow:0 1px 0 rgba(var(--lit),calc(.55*var(--litK)))}

/* ---- the page's own zone ---- */
/* the bar holds no page's tools (v9 · Q140, BUILD.md → TB: "the bar's middle stays empty"): the wall's lens went to
   its own head, and Focus's grouping and lens were its head's already. The zone stays in the markup, never shown */
.hdr-ctx{display:none;align-items:center;gap:9px;min-width:0}
#ctl-wall{display:flex;align-items:center;gap:9px}
.hdr-vr{flex:none;width:1px;height:18px;margin:0 3px 0 1px;background:rgba(var(--ink),.1);box-shadow:var(--grooveShV)}
.seglbl{font:500 11px var(--sans);letter-spacing:.005em;text-transform:none;color:var(--dim)}
#top .seglbl{color:var(--faint)}

/* ---- what the product does ---- */
.hdr-acts{display:flex;align-items:center;gap:9px;margin-left:auto}
#top .btn{display:inline-flex;align-items:center;height:var(--hdrH);padding:0 13px}
#clock{font:500 10px var(--mono);color:var(--faint)}

.status{display:inline-flex;align-items:center;gap:9px;height:var(--hdrH);padding:0 12px;border-radius:8px;
  background:var(--well);box-shadow:var(--wellSh);
  font:500 11px var(--sans);letter-spacing:.005em;text-transform:none;color:var(--dim);
  cursor:pointer;white-space:nowrap}
.status i{flex:none;width:7px;height:7px;border-radius:50%;background:var(--ghost)}
.status.live i{background:var(--accent);box-shadow:0 0 7px var(--accent),0 0 16px rgba(var(--accRGB),.5)}
.status.connecting i{background:var(--warn);box-shadow:0 0 7px var(--warn)}
.status.err i{background:var(--ask);box-shadow:0 0 8px var(--ask)}
/* OFF THE AIR THE PILL IS A CONTROL. Live it is a readout — a well with an
   LED in it, and pressing it does nothing — so it takes no touch. While the
   feed is retrying it says which try and how long, and a press takes that try
   now (js/main.js), so it wears the control family's own contact for exactly
   as long as there is something to press. */
.status{cursor:default}
.status.act{cursor:pointer}
@media (hover:hover){ .status.act:hover{box-shadow:var(--wellSh),inset 0 0 0 1px rgba(var(--askRGB),.28)} }
/* Settings is a utility, not an action: it is the quiet plate every other
   secondary control in the bar is. The one coloured plate up here is Markets. */
#hdr-toolbtn{display:none}

/* ---- THE SHED LADDER, in the order the bar can spare them. Each class is
   added by js/ui/header.js when the row runs out of width and taken off again
   when it comes back; a page's own control joins in with `data-shed`. Since
   v9 · Q186 each side of the kept centre climbs its own: these are the left's,
   the right zone's (hs-rgap · hs-mkts · hs-ground) are in css/shell.css →
   THE RIGHT ZONE, and the camera below is the right's last. ---- */
#top.hs-lbl .seglbl,#top.hs-lbl [data-shed="ornament"]{display:none}
#top.hs-cnt [data-shed="detail"]{display:none}
#top.hs-group #seg-group{display:none}
#top.hs-tabs .vtab{padding:0 9px}   /* the tabs keep their own tracking: the .1em here was the capitals' (tabs were set uppercase), and on sentence case it spread the words as the bar narrowed */
#top.hs-gap{gap:0 6px}
#top.hs-gap :where(.hdr-ctx):not(#y-),#top.hs-gap #ctl-wall{gap:6px}
#top.hs-gap .vtab{padding:0 7px}
#top.hs-gap #ctl-wall .ds-seg>button,#top.hs-gap #seg-lens>button{padding:0 var(--sp6)}
#top.hs-gap .hdr-vr,#top.hs-gap [data-shed="extra"]{display:none}
#top.hs-lens #lbl-lens,#top.hs-lens #seg-lens{display:none}
/* v8.8 · U13 · the camera key, the last to go: a product action, and ⌘⇧S keeps its act */
#top.hs-shot #btn-shot{display:none}

/* (THE CROSS-SECTION'S SHARE OF THE BAR went in v9 · Q12: its controls are its page's own head,
   css/spaghetti.css → .spg-head, and the bars chip is said on its plate. #hdr-bsk, empty since the
   Basket's controls left the bar, went with it; Funding's left it in v9 · Q10.) */

/* ------------------------------ layout ------------------------------- */
/* (v9 · Q140 round 3) a breath between the bar and every page's head (the owner: "a little space to the top") */
#view-root{display:flex;min-height:0;position:relative;padding:6px 16px 12px;gap:14px}
/* A VIEW LEFT IS KEPT (frames-everywhere; main.js → seatViews; docs/PERFORMANCE.md → A VIEW LEFT IS KEPT): rendered and
   skipped — content-visibility:hidden keeps its styles and its layout and paints, hits and reads none of it — out of the
   row (absolute where the row puts a view, so it comes back the size it left) and under it (its own box never shows or
   takes a press over the view shown) */
#view-root>[data-kept]{content-visibility:hidden;position:absolute;top:6px;left:16px;right:16px;bottom:12px;z-index:-1}
#view-wall{flex:1;min-width:0;display:flex;flex-direction:column;min-height:0}
#view-focus,#view-docs{flex:1;min-width:0;overflow:auto}
/* the cross-section fills its view and never scrolls the page: the chart is
   the surface, and a chart you have to scroll to is not one. Nothing clips its plates' shadows at the page's box (css/
   calendar.css → THE PLATES' SHADOWS ARE WHOLE): each plate clips its own, and a page clipping at their edges cut the
   shadow square under the radius (a wedge on paper, a hard arc on Graphite and Midnight; image 14, 2026-11-09) */
#view-spaghetti{flex:1;min-width:0;min-height:0;display:flex}
#foot{display:flex;align-items:center;gap:16px;padding:8px 18px;
  font:500 10px var(--mono);letter-spacing:0;color:var(--faint);
  box-shadow:inset 0 1px 0 rgba(var(--ink),.07)}
#fps{min-width:54px;text-align:right}
#fps.warn{color:var(--warn)}

/* -------------------------------- wall ------------------------------- */

/* the whole page is holding the book, so the whole page says so */
body.wallgrab{user-select:none;-webkit-user-select:none}
body.wallgrab,body.wallgrab *{cursor:grabbing!important}

/* the session pill — a small engraved plate, tinted by regime */
.sesspill{font:500 11px var(--sans);letter-spacing:.005em;text-transform:none;
  padding:2px 6px;border-radius:4px;color:var(--dim);
  background:var(--well);box-shadow:inset 0 1px 2px rgba(var(--shd),calc(.14*var(--shdK)))}
.sesspill:empty{display:none}
.sesspill.s-pre_market,.sesspill.s-post_market{color:var(--warnDeep);background:var(--warnWash)}
.sesspill:is(.s-weekend,.s-holiday){color:var(--wkndInk);background:var(--wkndWash)}
.sesspill.s-close{color:var(--dim);background:rgba(var(--ink),.07)}

/* the bar's DOM grouping stands while a DOM is on screen and closes as one
   object when none is (js/ui/wall.js → syncHeaderCtl, js/ui/motion.js →
   swing); #ctl-wall sets its own display, so its `hidden` has to be stated */
#ctl-wall[hidden]{display:none!important}

/* =====================================================================
   THE TRADES RAIL — one well holding three instruments: the FLOW plate
   (who is trading, per book), the TAPE well (one row per print) and the
   FOOT plate (the minute as one reading). js/ui/trades.js owns it.

   Motion here follows the system and adds three gestures of its own, all
   on transform and opacity except the one that cannot be:
     · a new print ARRIVES from the rail's edge with a flash whose strength
       is its notional (--fi), on ::before, so no row repaints a shadow;
     · the rows under it are EASED down the height it took (a composited
       transform on .tr-tape, js) instead of jumping;
     · the flow plate MORPHS between open and minimised by travelling a grid
       track 1fr ⇄ 0fr. That is a layout property, and it is right here for
       the reason a book's collapse is right on the wall: the height change
       IS the motion, it runs on one element for --tLeave, and both states
       stay mounted, so there is nothing to measure and no frame at the
       wrong size.
   ===================================================================== */
#rail{--railW:320px;
  width:var(--railW);flex:none;display:flex;flex-direction:column;min-height:0;
  padding:5px;border-radius:12px;background:var(--well);box-shadow:var(--wellSh)}
#rail.closed{display:none!important}
.tr-in{flex:1;min-height:0;display:flex;flex-direction:column;gap:6px}
/* v9 · sidepanels · FOLDED, THE TAPE IS ITS RAIL (css/ds.css → .ds-rail; js/ui/trades.js → railSum), at the column's
   full height, in the flow, --railFold wide; and it MOVES as the ticket's column does, mirrored (js/ui/wallmove.js;
   css/wallexec.css → .wd.moving): its box the flow's alone, its content the sheet sliding out past the page's right
   edge over the rail, the box clipping it there. Until v9 the box's width was animated (the wall laid out a frame) and
   it folded to a 26 px opener at the top right (#rail-open, kept hidden for the boot's one listener) */
#rail{position:relative}
#rail[data-open="false"]:not(.moving){width:var(--railFold,40px);padding:0;background:none;box-shadow:none;overflow:visible}
#rail[data-open="false"]:not(.moving)>.tr-in{visibility:hidden}
.tr-tabw{position:absolute;right:0;top:0;bottom:0;width:var(--railFold,40px);display:flex}
#rail[data-open="true"]:not(.moving)>.tr-tabw,#rail:not([data-open])>.tr-tabw{visibility:hidden;pointer-events:none}
#rail.moving{padding:0;background:none;box-shadow:none;overflow:visible;z-index:3;clip-path:inset(-48px 0 -48px -200vw)}
#rail.moving>.tr-in{visibility:visible;position:absolute;z-index:1;right:0;top:0;bottom:0;box-sizing:border-box;width:var(--railW);padding:5px;
  border-radius:12px;background:var(--plateTall);box-shadow:var(--plateShSm);will-change:transform}
#rail.moving>.tr-tabw{z-index:2;will-change:opacity}   /* the rail is a fold's lid while it moves, its own layer (wallmove.js → write) */
#rail.moving.opening>.tr-tabw{z-index:0}                 /* an opening's sheet comes out over it */
#rail-open{display:none!important}

.tr-h{flex:none;display:flex;flex-direction:column;gap:7px;padding:7px 7px 2px}
.tr-h .line{display:flex;align-items:center;gap:8px;min-width:0}
.tr-h .t{flex:none;font:500 11px var(--sans);letter-spacing:.005em;text-transform:none;color:var(--text)}
.tr-h .n{flex:none;white-space:nowrap;font:500 10px var(--mono);color:var(--faint)}
.tr-h .ico{flex:none}
.tr-sheetx{display:none!important}
/* a toggle icon is a pressed switch when on, thrown like every other one */
.ico.tog.on,.ico.tog.on:hover{color:var(--onDark)}
.chip{font:600 10px var(--mono);letter-spacing:0;padding:5px 7px;border-radius:5px;
  color:var(--dim);background:var(--plate);box-shadow:var(--plateShSm)}
.chip:hover{color:var(--text)}
.chip.on{color:var(--onDark);box-shadow:none}
#rail .chip{display:inline-flex;align-items:center;gap:4px;padding:5px 8px}
.chip .sk{width:10px;height:10px;flex:none;display:block;color:var(--accent);
  transition:color var(--tState) var(--settle)}

#rail .vchip{padding:4px 7px;border-radius:6px;font:500 10px var(--mono);white-space:nowrap}
/* LOAD OLDER (D2): the tape's last row asks QFEX for the next page of prints */
.tr-older{display:flex;align-items:center;gap:8px;padding:8px 6px 10px}
.tr-older[hidden]{display:none}
.tr-older .hint{font:500 10px/1.3 var(--mono);color:var(--faint);white-space:nowrap;overflow:hidden;text-overflow:ellipsis}


/* ------------------------------- focus ------------------------------- */


/* ------------------------------- modal ------------------------------- */
/* A study detail is the panel pulled open, so it rises from the bottom edge
   as a sheet of GROUND with a grab handle — the same gesture the phone layout
   already used, now the one shape a secondary surface has anywhere. */
#modal{position:fixed;inset:0;z-index:100;display:none;align-items:flex-end;justify-content:center;
  background:var(--veil);backdrop-filter:blur(3px)}
#modal.on{display:flex;animation:fade .2s var(--ease)}
@keyframes fade{from{opacity:0}to{opacity:1}}
@keyframes sheet{from{transform:translateY(calc(26px*var(--rmT,1)))}to{transform:none}}
/* v9 · Q54 · ONE STUDY, OPENED ON THE HEAT (js/ui/studysheet.js; round 8, the owner, of round 7's price pane: "it
   should be either in the candlestick or the heatmap"). The market's heat fills the window, the study opened at its
   foot and the record's other studies slim under it (js/ui/heatflow.js → flowBand); one compact row on top (the
   market, the study's name and ⓘ, the heat's window, its lines, close), its lines in a rail over the heat's right edge,
   a sheet from the foot on a phone. Round 6–7: the number, a price pane over the study's own plot, the stack's
   studies under them, the lines in a rail the plot made room for (on a phone it squeezed the plot to nothing and its
   canvases showed through) */
#modal.sxc{align-items:stretch;justify-content:stretch;background:var(--void);backdrop-filter:none}
.mbox{position:relative;width:min(980px,94vw);max-height:92vh;overflow:hidden auto;border-radius:24px;
  background:var(--plateTall);padding:20px 26px 24px;outline:none;
  box-shadow:0 24px 64px rgba(var(--shd),calc(.32*var(--shdK))),0 2px 6px rgba(var(--shd),calc(.12*var(--shdK))),
    inset 0 1px 0 rgba(var(--lit),calc(.85*var(--litK))),inset 0 0 0 1px var(--line)}
.hint{font:500 11px var(--sans);letter-spacing:.005em;text-transform:none;color:var(--dim)}
.mbox.sxf{width:100%;height:100%;max-height:none;overflow:hidden;border-radius:0;padding:0;display:flex;flex-direction:column;box-shadow:none;background:var(--plateTall)}
.note{max-width:62ch;font:400 12px/1.6 var(--sans);color:var(--dim);padding-top:14px;text-wrap:pretty}
.note code{font:500 10px var(--mono);background:var(--well);border-radius:4px;padding:1px 5px}
.sxp-top{display:flex;align-items:center;gap:8px;flex:none;height:44px;padding:0 10px 0 14px;border-bottom:1px solid var(--line)}
/* (round 9, pin 1: the study's name left the head for its row's — the head keeps it for a screen reader) */
.sxp-srt{position:absolute;width:1px;height:1px;margin:-1px;padding:0;overflow:hidden;clip:rect(0 0 0 0);white-space:nowrap}
.sxp-sp{flex:1;min-width:0}
.sxp-mkt{display:inline-flex;align-items:center;gap:6px;padding:2px 8px 2px 4px;border-radius:7px;background:var(--well);font:600 11px var(--mono);color:var(--text)}
.sxp-mkt b{font-weight:600}
.sxp-rsw{flex:none}
.sxp-body{position:relative;flex:1;min-height:0;overflow:hidden}
.sxp-heat{position:absolute;inset:0;width:100%;height:100%;display:block}
.sxp-heat.row{cursor:pointer}
.sxp-heat.grab{cursor:grab}
.sxp-heat.held{cursor:grabbing}
/* THE STUDIES DOCK's keys (round 9; js/ui/heatflow.js → dockBand draws the rest): laid over the canvas where the render
   thread leaves their places — the head row on the seam (it rides a fold on the render thread's own curve and time),
   and the tall row's ⓘ */
.sxd{position:absolute;inset:0;pointer-events:none}
.sxd-h{position:absolute;left:0;top:0;height:26px;display:flex;align-items:center;gap:6px;padding:0 8px 0 12px;pointer-events:auto;
  transition:transform var(--tLeave) var(--settle)}
.sxd-t{display:inline-flex;align-items:baseline;gap:6px;font:600 12px var(--sans);color:var(--dim)}
.sxd-t b{font:600 10px var(--mono);color:var(--faint)}
.sxd-ch{gap:3px;color:var(--dim)}
.sxd-ch.open{background:rgba(var(--ink),.07);color:var(--text)}
.sxd-fold .ds-i{transition:transform var(--tLeave) var(--settle)}
.sxd-fold.up .ds-i{transform:rotate(180deg)}
.sxd-i{position:absolute;left:0;top:0;pointer-events:auto;color:var(--faint);transition:transform var(--tState) var(--settle),color var(--tEnter) var(--settle),opacity var(--tEnter) var(--settle)}
.sxd-i.on{color:var(--text);background:rgba(var(--ink),.07)}
.sxp-body:has(.sxp-heat.held) .sxd-i{opacity:0}
.sxd-i.gone{visibility:hidden}
/* the chooser's rows: a check on those shown (several at once, so never the kit's picked plate) */
.sxd-mi.off .ds-i{visibility:hidden}

/* the band's studies, for a screen reader and the keyboard (the canvas draws them; Tab walks them) */
.sxp-sr{position:absolute;width:1px;height:1px;margin:-1px;padding:0;overflow:hidden;clip:rect(0 0 0 0);white-space:nowrap;list-style:none}
/* the ⓘ's summary: its name, a line, why and how in short */
.sxp-info b{display:block;font:600 13px var(--sans);color:var(--slabInk);margin:0 0 4px}
.sxp-info h4{margin:10px 0 3px;font:500 11px var(--sans);letter-spacing:.005em;text-transform:none;color:var(--slabFaint)}
.sxp-info p{margin:0;font:400 13px/1.6 var(--sans);color:var(--slabDim);text-wrap:pretty}
/* ITS LINES: a rail over the heat's right edge, on its own ground, sliding in from it */
.sxp-drawer{position:absolute;top:8px;right:8px;width:300px;max-height:calc(100% - 16px);overflow:hidden auto;display:flex;flex-direction:column;
  background:var(--plateTall);border-radius:14px;
  box-shadow:0 14px 40px rgba(var(--shd),calc(.28*var(--shdK))),inset 0 1px 0 rgba(var(--lit),calc(.7*var(--litK))),inset 0 0 0 1px var(--line);
  opacity:0;transform:translateX(calc(16px*var(--rmT,1)));pointer-events:none;transition:opacity .18s var(--ease),transform .3s var(--rise)}
.sxp.cfg .sxp-drawer{opacity:1;transform:none;pointer-events:auto}
.sxp-rh{display:flex;align-items:center;justify-content:space-between;gap:6px;padding:10px 8px 2px 14px}
.sxp-rh h3{margin:0;font:600 13px var(--sans);color:var(--text)}
.sxp-grp{padding:6px 14px 10px;border-bottom:1px solid var(--line)}
.sxp-grp:last-child{border-bottom:0}
.sxp-row{display:flex;align-items:center;justify-content:space-between;gap:10px;min-height:32px}
.sxp-row>span{font:500 12px var(--sans);color:var(--dim)}
.sxp-none{margin:4px 14px 14px;font:500 12px/1.45 var(--sans);color:var(--dim)}
.sxp-band{position:relative;margin:2px -4px 0}
.sxp-bandc{display:block;width:100%;height:46px;cursor:pointer;touch-action:none}
.sxp-bandr{position:absolute;inset:0;width:100%;height:100%;margin:0;opacity:0;pointer-events:none}
.sxp-band:has(.sxp-bandr:focus-visible){border-radius:10px;box-shadow:0 0 0 1px rgba(var(--acc2RGB),.7)}
.sxp-act{margin-top:4px;padding:4px 0;border:0;background:none;font:500 12px var(--sans);color:var(--text);cursor:pointer;text-decoration:underline;text-decoration-color:rgba(var(--ink),.25);text-underline-offset:3px;transition:text-decoration-color var(--tEnter) var(--settle)}
@media (hover:hover){ .sxp-act:hover{text-decoration-color:rgba(var(--ink),.7)} }

/* a phone (round 9, pin 5: "the ui for here is buggy on the mobile"): ONE LINE of keys — the market, the window's
   segments compact, the lines, close; the heat on top and the dock under it in the sheet's own flow, the sheet scrolling
   where the two are taller than the screen (studysheet.js → size), a swipe the sheet's; its lines a sheet from the foot,
   its corners the phone's sheets'. Round 8 stood the study's name and its ⓘ in the head beside the touch-sized keys */
html[data-phone] .sxp-top{height:46px;padding:0 4px 0 10px;gap:4px}
html[data-phone] .sxp-body{overflow:hidden auto;overscroll-behavior:contain}
html[data-phone] .sxp-heat{position:relative;inset:auto;width:100%;touch-action:pan-y}
html[data-phone] .sxp-drawer{top:auto;left:0;right:0;bottom:0;width:auto;max-height:62%;border-radius:18px 18px 0 0;transform:translateY(calc(24px*var(--rmT,1)));
  padding-bottom:env(safe-area-inset-bottom,0px)}
html[data-phone] .sxp.cfg .sxp-drawer{transform:none}
html[data-phone] .sxp-row{min-height:44px}
/* a finger's sheet (a tablet, a phone): the head's keys at a finger's size */
html[data-input="touch"] .sxp-top{height:52px}
html[data-input="touch"] .sxp-top .ds-ico{width:40px;height:40px}
html[data-input="touch"] .sxp-rsw .ds-seg>button{min-height:34px;min-width:40px}
html[data-phone] .sxp-top{height:48px}
html[data-phone] .sxp-top .ds-ico{width:38px;height:38px}
html[data-phone] .sxp-rsw .ds-seg>button{min-height:26px;min-width:32px;padding:0 6px}
html[data-input="touch"] .sxd-h{height:26px}
html[data-input="touch"] .sxd-ch,html[data-input="touch"] .sxd-fold{height:26px}

/* =====================================================================
   THE SETTING ROW, as the Funding table's own settings popover borrows it
   (js/ui/fundingview.js → settingsHTML, inside .fd-pop). Settings itself
   is v7's sheet now (css/settings.css, js/ui/settings.js); these rules are
   all that is left of the drawer it replaced, kept for the one surface
   still built from them.
   ===================================================================== */

/* A checkbox in this system is a switch, and a switch says what state it is
   in. Nothing else uses a tick mark, so a tick would be the only symbol a user
   had to learn; ON / OFF needs no legend. (The DOM popover and the study
   detail still carry native checkboxes; Settings uses the kit's toggle.) */
input[type=checkbox]{-webkit-appearance:none;appearance:none;cursor:pointer;flex:none;
  width:auto;height:auto;min-width:44px;padding:5px 11px;border-radius:6px;
  display:inline-grid;place-items:center;
  font:500 11px var(--sans);letter-spacing:.005em;text-transform:none;
  background:var(--plate);box-shadow:var(--plateShSm);color:var(--dim)}
input[type=checkbox]::after{content:"Off"}
input[type=checkbox]:checked{background:var(--dark);box-shadow:var(--pressSh);color:var(--onDark)}
input[type=checkbox]:checked::after{content:"On"}
/* (a native range is never drawn: every number on a track is the kit's slider, ds.css → THE SLIDER; the two still in the
   page — the heat's lenses, a study's band — are their keys' alone, laid invisible over their picture) */

/* =====================================================================
   MARKET BROWSER — the whole venue in one table, and the wall you are
   assembling from it along the bottom edge.

   Every row is a physical object seated on the well: a RAISED plate with a
   hard bottom edge and a lit top lip; the cursor row lifts off the ground;
   a row already on the wall is a PRESSED switch sunk into it. That is the
   whole "selected" language — no wash, no tick, no badge. The wall you have
   built reads as the dark rows in the list.

   Numbers are engraved to match: a light-side highlight on a plate, a
   dark-side shadow inside a switch.
   ===================================================================== */
#picker{position:fixed;inset:0;z-index:110;display:none;place-items:center;
  background:var(--veil);backdrop-filter:blur(3px)}
#picker.on{display:grid;animation:fade .22s var(--ease)}

/* ---- the table ---- */
.c-px{text-align:right;font:500 11px var(--mono);color:var(--text)}
/* =====================================================================
   THE DAY'S CHANGE — the figure, and the track it is read on.

   The figure is the number; the track under it is what lets two hundred of
   them be compared without reading any of them. It is the IMBALANCE GAUGE's
   grammar one rung down: a WELL cut into the row, the balance point etched
   across the middle as a vertical groove, the fill running from that point
   toward the side the market went in that side's hue, and a fader's cap on
   the end of it. Up is --bid and down is --ask — the cross-section's
   above/below rule, and no sixth hue.

   The fill is a scaleX on a half-width block, so a value landing writes one
   transform and nothing in the row lays out; the cap is placed with a calc
   over the same registered number, which is why --cf has to INHERIT (the
   funding table's --fk-* do not, because nothing below those rows reads
   them). Nothing here transitions: the figure is written at the digest's
   cadence, not animated, and a bar easing under a table you are ranking by
   would be two events.

   Two states the track has to be able to say. PAST THE SCALE — the market
   moved further than the ninetieth percentile of the field — keeps its true
   figure and hatches the end of its track, the texture every abnormality in
   this product wears, rather than clamping to a full bar that would read as
   a tie with every other market past it. SHORTER THAN A DAY — a market
   listed inside the window — wears the release chip's dashed ring, for the
   release chip's reason: the column head says 1D and this one is not.
   ===================================================================== */
@property --cf{syntax:"<number>";inherits:true;initial-value:0}
.c-vol{text-align:right;font:500 11px var(--mono)}
.c-vol{color:var(--text)}
/* =====================================================================
   WAITING FOR THE VENUE — the table before its first digest.

   The registry ships with the app, so the browser knows the shape of the
   answer the instant it opens: which markets are listed, what they are
   called, what they look like, what QFEX charges to make one. What it does
   not know is every number the venue has to send — mid, spread, the day's
   notional, open interest, funding — and the first `market_stats` frame is
   about four seconds behind the page on a good connection.

   So those columns stand in for themselves. The figure underneath is still
   there and still laid out, HIDDEN rather than removed, with a recess drawn
   over it — so the row is already exactly the height it will be and every
   column is already exactly where it will be, and when the frame lands the
   numbers appear in place with nothing on the page moving. A bar is a WELL,
   because a number that has not arrived is an absence, and on a light ground
   an absence is cut into the plate rather than painted lighter. On a row
   that is on the wall the recess is cut into the dark instead, the same way
   that row's percentile chip already is.

   What stays legible is everything the registry already knows and the venue
   cannot change under you: the mark, the ticker, the company, the quote, the
   max leverage. The browser is searchable from the first frame; it simply
   does not print a number it has not been told.
   ===================================================================== */
@keyframes pkSweep{from{transform:translate3d(calc(-130%*var(--rmT,1)),0,0)}to{transform:translate3d(calc(400%*var(--rmT,1)),0,0)}}

/* ------------------------------ boot ------------------------------ */
/* v8.1 S1: the loading screen's rules are inline in index.html (<style id="yb-css">), so it
   paints on the first frame before any stylesheet; nothing here may style #loading */

/* -------------------------------- tour ------------------------------- */
/* v7: the tour's ring and card are css/docs.css's (THE TOUR), with the manual's "show me" */

/* =====================================================================
   FOCUS v5 — price/heatmap workspace. Header bar · three columns
   (book · chart+lanes · flow), side columns collapse to rails. Crosshair
   geometry: chart and lanes share PADL/PADR so the one vertical line
   reads continuous across both.
   ===================================================================== */

/* the handle that trades height between the two. It is a raised bar on a
   row-resize strip, tucked into the gap so it costs no layout of its own. */
.fgrip{flex:0 0 auto;height:12px;margin:-6px 0;cursor:row-resize;z-index:8;
  display:flex;align-items:center;justify-content:center;opacity:.5;
  transition:opacity var(--tLeave) var(--settle)}
.fgrip i{width:54px;height:5px;border-radius:3px;display:block;
  background:var(--plate);box-shadow:0 1px 0 var(--edge),inset 0 1px 0 var(--lip)}
@media (hover:hover){ .fgrip:hover{opacity:1;transition-duration:var(--tArrive)} }

/* ---- the two chart popovers -------------------------------------------
   Raised plates that ENTER from the control that opened them; that control
   is pressed while they are up, because open is a state and a state throws.
   ---------------------------------------------------------------------- */
.fpop{position:absolute;top:42px;right:13px;z-index:9;width:262px;
  display:flex;flex-direction:column;gap:10px;padding:13px 14px 14px;
  border-radius:12px;background:var(--plateTall);
  box-shadow:0 2px 0 var(--edge),0 14px 34px rgba(var(--shd),calc(.22*var(--shdK))),inset 0 1px 0 var(--lip);
  opacity:0;pointer-events:none;transform:translateY(-6px);transform-origin:100% 0;
  transition:opacity var(--tEnter) var(--settle),transform var(--tEnter) var(--settle)}
.fpop.on{opacity:1;transform:none;pointer-events:auto}
.fpop-lanes{top:40px;max-height:calc(100vh - 160px);overflow:auto}
.fpophead{display:flex;flex-direction:column;gap:3px}
.fpophead b{font:500 11px var(--sans);letter-spacing:.005em;text-transform:none;color:var(--text)}
.fpophead span{font:500 10px var(--mono);color:var(--faint)}
.fpopchips{display:flex;flex-wrap:wrap;gap:5px}
.fpopact{display:flex;align-items:center;gap:6px}
.fpopact .sp{flex:1}
/* the strip's own head controls */
.lanetog{width:20px;height:20px;border-radius:6px;font:600 10px var(--mono);line-height:1;
  color:var(--dim);background:var(--plate);box-shadow:var(--plateShSm)}
.lanesbtn{display:flex;align-items:center;gap:5px}
.lanesbtn b{font:600 10px var(--mono);letter-spacing:0;text-transform:none}

.hchip{padding:5px 9px;border-radius:6px;font:500 11px var(--sans);letter-spacing:.005em;
  text-transform:none;color:var(--dim);background:var(--plate);box-shadow:var(--plateShSm)}
.hchip:hover{color:var(--text)}
.hchip.on{color:var(--onDark);box-shadow:none}

/* ------------------------------ responsive --------------------------- */
/* the rail gives width back to the wall before the wall starts shedding
   books: the tape's columns are fixed, and only the price column flexes */
@media (max-width:1560px){ #rail{--railW:296px} }
@media (max-width:1320px){ #rail{--railW:272px} }
@media (max-width:1180px){ #rail{--railW:250px} }
/* REDUCE MOTION (Settings → Accessibility; motion.md → EVERY MOVE HAS ITS REDUCED FORM; js/ui/tokens.js → REDUCE).
   The reader's switch, off by default. Every state survives and nothing lands at once: travel dissolves, a zoom
   fades, a spring tightens to its ease, a loop rests, and what the hand drives still follows the hand. The
   stylesheet's half is three numbers and four durations. Every keyframe and every arrival's offset multiplies its
   travel by --rmT, its zoom by --rmZ and its blur by --rmB (each 1 when unset), so under the switch the travel is
   0 and the fade beside it is all that moves; the long tokens are re-cut, the pop (the one overshoot) becomes the
   settle, and a surface that slid in with no fade of its own dissolves on --tRm and --fade. A rule a surface still needs (a loop's rest, a sweep's tint) sits under :root[data-motion] beside its own.
   Until v9 the machine's prefers-reduced-motion collapsed every duration to instant here: the jump the owner saw
   ("although the reduce motion was on the screen didn't jump" was Apple's, 2026-11-01). */
@keyframes rmIn{from{opacity:0}}
:root[data-motion="reduce"]{--rmT:0;--rmZ:0;--rmB:0;--pop:var(--settle);--tSheet:.24s;--tPop:.18s;--tReveal:.3s;--tRoll:.2s;--tRm:.2s;
  --spring:var(--settle)!important}   /* the re-rank's curve js/ui/motion.js writes on the root's own style */
/* THE STILL HOOK (?motion=still; store.js → calm): a probe's or a capture's settled page, never the reader's. Every
   duration collapses, the press stops moving the plate, an infinite keyframe is pinned to its first frame */
:root[data-motion="still"] *,
:root[data-motion="still"] *::before,
:root[data-motion="still"] *::after{
    animation-duration:.001s!important;animation-iteration-count:1!important;
    transition-duration:.001s!important;scroll-behavior:auto!important}
:root[data-motion="still"] .btn:not(y-):active:not(:disabled),
:root[data-motion="still"] .ico:not(y-):active:not(:disabled),
:root[data-motion="still"] .vtab:not(y-):active:not(:disabled),
:root[data-motion="still"] .status:not(y-):active:not(:disabled),
:root[data-motion="still"] .chip:not(y-):active:not(:disabled),
:root[data-motion="still"] .hchip:not(y-):active:not(:disabled),
:root[data-motion="still"] .lanetog:not(y-):active:not(:disabled),
:root[data-motion="still"] .railopen:not(y-):active:not(:disabled),
:root[data-motion="still"] .spg-cat:not(y-):active:not(:disabled),
:root[data-motion="still"] .spg-rk:not(y-):active:not(:disabled),
:root[data-motion="still"] .menu-it:not(y-):active:not(:disabled),
:root[data-motion="still"] .fd-h:not(y-):active:not(:disabled),
:root[data-motion="still"] .fd-row:not(y-):active:not(:disabled),
:root[data-motion="still"] .dfz:not(y-):active:not(:disabled){
    transform:none!important}

/* ---- the head ---- */
/* THE RANKING'S OWN FIGURE ON A GRID PLATE. Most cells on a grid are the
   ranking's top-ups rather than your books, so the number the order was made
   of is what a cell cannot be read without. It sits on the left of the line —
   .gp-l clips from the right — and shrinks before it clips. */
/* the earnings slot js/ui/earnings.js fills; empty until then */
.cearn:empty{display:none}

/* THE RELEASE CALENDAR — the chip on a book: its slot is the wall's (wallcard.js), empty and taking no room until the
   desks' first calendar answer paints it; its look is the calendar's marks' (css/calglyph.css, fetched with that answer) */
.cearn{flex:none;display:none}

/* THE FUNDING PAGE'S RULES live in css/funding.css (v7, the FUNDING package):
   the page, the Lines face, the unfolded row, both popovers. */

/* =====================================================================
   BASKET — v7 rebuilt the page (design/imported/basket/Basket Desk); its
   rules, and the positions dock's, are css/basket.css.
   ===================================================================== */

/* =====================================================================
   THE DOM CHROME — the headline readings, the lens bar, the control row
   and the footer around every DOM (js/ui/domhud.js). The design's own
   (design/DOM v2 (standalone)), stated in this system's channels so it is
   cut from the grey deck and from matt black alike.

   NOTHING HERE MOVES BY LAYOUT. Every bar, knob and bin carries its value as
   a custom property and draws it with a TRANSFORM, so an update is a
   composite, never a reflow — the ladder beside it is drawn in a worker and
   the page must stay free to take the next frame.
   ===================================================================== */
.dlbl{flex:none;font:500 11px var(--sans);letter-spacing:.005em;text-transform:none;color:var(--faint);white-space:nowrap}
.dgrp{flex:none;display:flex;align-items:center;gap:8px}
.dsp{flex:1}

/* ---- the control row ---- */
.dctl{display:flex;align-items:center;flex-wrap:wrap;gap:8px 18px;min-width:0}
/* every figure in the chrome changes several times a second; its layout is
   its own, so a digit that moves never re-lays out the page around it */
.dctl{contain:layout style}
.drc{position:absolute;left:var(--rcx,50%);top:28px;z-index:4;height:24px;padding:0 11px;display:inline-flex;align-items:center;gap:7px;
  border-radius:12px;border:none;font:600 10px var(--mono);white-space:nowrap;cursor:pointer;
  color:var(--onDark);background:var(--chip);box-shadow:var(--chipRing),0 4px 14px rgba(0,0,0,.45);
  transform:translateX(-50%)}
.drc.dn{top:auto;bottom:14px}
/* it comes and goes as a fade, where it floats — nothing around it moves */
.dwell .drc,.fdc-dom .drc{transition:opacity var(--tState) var(--settle),visibility 0s linear 0s}
.dwell .drc.idle,.fdc-dom .drc.idle{opacity:0;visibility:hidden;pointer-events:none;
  transition:opacity var(--tLeave) var(--settle),visibility 0s linear var(--tLeave)}
.dfz.on{color:var(--onDark);box-shadow:none}
@media (hover:hover){ .drc:hover{filter:brightness(1.18)} .dfz:hover{color:var(--text)} .dfz.on:hover{color:var(--onDark)} }

/* ---- MOTION EASED (v9 · Q159; js/ui/walknote.js): a busy book stepped its Motion below the reader's pick, said once.
   The dark chip a label over data is on either ground (.drc), at the well's foot on the left, over the tape's oldest
   stretch above its time axis — never over the ladder's figures, nor the heat's "liquidity building" plate at its head; three bars settle from
   level to stepped as it arrives (the motion easing, drawn), a hairline under it runs out its hold and stops while a
   hand or the keyboard is on it, and Revert gives the reader's own Motion back. It fades where it floats. ---- */
.wnote{position:absolute;left:12px;bottom:30px;z-index:5;height:26px;padding:0 4px 0 10px;display:inline-flex;align-items:center;gap:8px;
  border-radius:13px;overflow:hidden;white-space:nowrap;font:600 10px var(--mono);letter-spacing:0;color:var(--onDark);
  background:var(--chip);box-shadow:var(--chipRing),0 6px 18px rgba(var(--shd),calc(.32*var(--shdK)));
  opacity:0;visibility:hidden;pointer-events:none;transform:translateY(4px) scale(.97);transform-origin:0 50%;
  transition:opacity var(--tLeave) var(--settle),transform var(--tLeave) var(--settle),visibility 0s linear var(--tLeave)}
.wnote.on{opacity:1;visibility:visible;pointer-events:auto;transform:none;
  transition:opacity .24s var(--ease),transform .32s var(--settle),visibility 0s linear 0s}
.wnote-t em{font-style:normal;font-weight:500;color:var(--onDark2)}
.wnote.tight .wnote-t em{display:none}
.wnote-i{width:12px;height:12px;flex:none;fill:rgb(var(--acc2RGB))}
.wnote-i rect{transform-box:fill-box;transform-origin:50% 100%}
.wnote.on .wnote-i rect:nth-child(2){animation:wnoteB2 .6s var(--settle) .12s both}
.wnote.on .wnote-i rect:nth-child(3){animation:wnoteB3 .6s var(--settle) .2s both}
@keyframes wnoteB2{from{transform:scaleY(1)}to{transform:scaleY(calc(1 - 0.3*var(--rmZ,1)))}}
@keyframes wnoteB3{from{transform:scaleY(1)}to{transform:scaleY(calc(1 - 0.6*var(--rmZ,1)))}}
.wnote-r{height:20px;padding:0 9px;margin-left:2px;border:none;border-radius:10px;cursor:pointer;font:600 10px var(--mono);letter-spacing:0;
  color:var(--onDark);background:transparent;box-shadow:inset 1px 0 0 rgba(var(--lit),.12);
  transition:background var(--tLeave) var(--settle)}
.wnote-r:focus-visible{outline:none;box-shadow:0 0 0 1.5px rgb(var(--acc2RGB))}
.wnote-h{position:absolute;left:12px;right:12px;bottom:0;height:1px;background:var(--onDark2);opacity:.5;transform-origin:0 50%;transform:scaleX(0)}
.wnote.on .wnote-h{animation:wnoteH 6s linear both}
.wnote.held .wnote-h{animation-play-state:paused}
@keyframes wnoteH{ /* rm: keep, the time left */from{transform:scaleX(1)}to{transform:scaleX(0)}}
@media (hover:hover){ .wnote-r:hover{background:rgba(var(--lit),.1);box-shadow:none} }
.wnote-r:active{transform:scale(.95);transition:transform var(--tTouch) var(--contact)}
:root[data-motion] .wnote,:root[data-motion] .wnote.on{transform:none;transition:opacity var(--tArrive) linear} :root[data-motion] .wnote.on .wnote-i rect{animation:none} :root[data-motion] .wnote.on .wnote-i rect:nth-child(2){transform:scaleY(.7)} :root[data-motion] .wnote.on .wnote-i rect:nth-child(3){transform:scaleY(.4)}

/* ---- the well the ladder is drawn in ---- */
.dwell{position:relative;flex:1;min-height:0;border-radius:9px;overflow:hidden;background:var(--domWell);box-shadow:var(--domWellSh)}
.dwell>canvas{position:absolute;inset:0;width:100%;height:100%;display:block;cursor:crosshair}


/* ---- THE FOCUS CENTRE: the design's DOM at the size of the page -----------
   Its readings sit in the panel's head beside the face switch; the lens bar
   and the switches share one row under it; then ONE WELL, the ladder over
   its studies — the same dark slab, so the tape and the tracks read as one
   instrument; then the session. The well has no overflow of its own (the
   studies' popover leaves it upward), so each half rounds its own corners. */
/* the readings SHED from the right as the panel narrows — prints first (the
   tape shows them), then depth — so nothing ever slides under the chips */

.fdc-well{position:relative;flex:1;min-height:0;display:flex;flex-direction:column;margin:0 6px 6px;border-radius:9px;
  background:var(--domWell);box-shadow:var(--domWellSh)}
.fdc-dom{position:relative;flex:1;min-height:0;overflow:hidden;border-radius:9px 9px 0 0}
.fdc-dom>canvas{position:absolute;inset:0;width:100%;height:100%;display:block;cursor:crosshair}
.fdc-grip{margin:-6px 0;position:relative}

/* THE STUDIES (js/ui/focusstudies.js): two canvases and two keys. The tracks
   are a window onto the tape's span, slid by a transform between samples;
   the readings canvas lies over the whole stack and takes no pointer. Its
   height is SET by the page, never transitioned — a canvas whose box moves
   while a hidden tab's timeline is frozen comes back at the wrong size. */
.fst{position:relative;flex:none;height:18px;border-radius:0 0 9px 9px;touch-action:pan-y}
.fst-trk{position:absolute;overflow:hidden;pointer-events:none}
.fst-a{position:absolute;left:0;top:0;display:block;will-change:transform}
.fst-b{position:absolute;inset:0;width:100%;height:100%;display:block;pointer-events:none}
.fst.shut .fst-trk{display:none}
/* the rows in words (v9 · Q54): a list the keys walk and a screen reader reads; the
   canvas draws the ring on the row the keys are on, so the list itself shows nothing */
.fst-ax{position:absolute;left:0;right:0;top:18px;bottom:0;pointer-events:none;outline:none}
.fst-ax>button{position:absolute;width:1px;height:1px;overflow:hidden;clip-path:inset(50%)}
.fst.shut .fst-ax{display:none}
/* two classes deep: the control family's :is() carries a `button` in its
   list, which outranks one class, and it sets position:relative */
.fst .fst-tog{position:absolute;left:4px;top:1px;z-index:2;width:18px;height:15px;font-size:11px}
/* the picker stands at the stack's left, beside its fold: the right end is the readings' keys (v9 · Q54) */
.fst .fst-pick{position:absolute;left:26px;top:1px;z-index:2;padding:2px 8px}
.fst .fpop-lanes{top:auto;bottom:calc(100% + 6px);left:6px;right:auto}

/* ---- the heat face's switches and readouts, in the wall's toolbar ---- */
[data-baseread].inert{opacity:.5}
/* THE L2 READOUT, in the footer on every page (js/ui/feedread.js): a small
   well holding the feed's LED, the frames a second, the newest frame's age as
   a meter, and the prints a second */

@container wtools (max-width:1180px){
  [data-gridnote]{display:none}
}

/* THE DECK (js/ui/deck.js, the dwell-armed panel) was retired in v7: the
   wall's bottom is the notch and the dock (js/ui/wallexec.js, css/wall.css). */
/* while a tag is in hand, the pointer says so everywhere */
body.armdrag,body.armdrag *{cursor:grabbing!important}

/* THE ORDER CARDS (js/ui/toasts.js) were retired in v8: every answer is a
   card of the one notification stack (js/ui/ds/notes.js, css/exec.css). */

/* THE ORDERS FACE, the rail's second face, was retired in
   v8.9 · Z2: the account panel shows the positions, orders and fills. */

/* =====================================================================
   THE ORDER BOOK — every book on the wall, the hybrid plate's and Focus's
   (js/ui/obview.js draws it in a render worker; js/ui/obhud.js is the
   chrome). The design's own (design/Order Book.html), stated in this
   system's channels and tokens, so it is cut from the grey deck and from
   matt black alike. The well is the DOM's (--domWell): the ground's own
   paper, or its matt black (v8.1 · R13).

   NOTHING HERE MOVES BY LAYOUT: a bar is a transform, a beat is an opacity,
   the panel ENTERS and LEAVES as a transform and an opacity, and every
   figure is written only when it changes.
   ===================================================================== */
.obwell{flex:1;min-height:0}
.obwell>canvas{cursor:crosshair}

/* ---- the two clocks: a dot a clock, lit when it ticks ---- */
.obbeat{flex:none;display:inline-flex;align-items:center;gap:10px;font:500 11px var(--sans);letter-spacing:.005em;text-transform:none;color:var(--faint)}
.obbeat>span{display:inline-flex;align-items:center;gap:5px}
.obbeat i{position:relative;width:5px;height:5px;border-radius:50%;background:var(--text);opacity:.3}
.obbeat i.buy{background:var(--bid)} .obbeat i.sell{background:var(--ask)} .obbeat i.liq{background:var(--accent)}
.obbeat i b{position:absolute;inset:-4px;border-radius:50%;opacity:0;background:radial-gradient(closest-side,currentColor,transparent);color:inherit;pointer-events:none}
.obbeat i b{color:var(--text)} .obbeat i.buy b{color:var(--bid)} .obbeat i.sell b{color:var(--ask)} .obbeat i.liq b{color:var(--accent)}
/* a clock faster than its flash is held lit, nothing animating (obhud.js → beatFlash) */
.obbeat i.lit{opacity:1} .obbeat i.lit b{opacity:.9}

/* =====================================================================
   CUSTOMIZE — one panel for every book (js/ui/obhud.js). A raised plate
   floating over the page, under the control that opened it, which stays
   pressed while it is up. It ENTERS from that control on the settle curve
   and LEAVES twice as slowly. Rows are engraved apart, each a legend and
   its switch bank; a row a book says differently about carries a mark in
   the mark's own orange, and pressing it hands the row back to every book.
   Every grouping carries a meter of how much of the book it fits.
   ===================================================================== */
.obp{position:fixed;z-index:210;display:flex;flex-direction:column;gap:10px;padding:12px 12px 14px;border-radius:10px;overflow-y:auto;overscroll-behavior:contain;background:var(--plate);outline:none;transform-origin:100% 0;
  box-shadow:0 2px 0 var(--edge),0 14px 34px rgba(var(--shd),calc(.38*var(--shdK))),inset 0 1px 0 var(--lip)}
.obp-h{display:flex;align-items:center;gap:6px}
.obp-t{font:500 11px var(--sans);letter-spacing:.005em;text-transform:none;color:var(--dim)}
.obp-sp{flex:1}
.obp-rs{height:20px;padding:0 7px;border-radius:5px;font:500 10px var(--mono);color:var(--faint);
  transition:color var(--tArrive) var(--ease),background-color var(--tArrive) var(--ease)}
.obp-rs.arm{color:var(--warn);background:rgba(var(--warnRGB),.12)}
.obp-x{width:20px;height:20px;font:600 12px/1 var(--mono);background:none}
@media (hover:hover){ .obp-rs:hover{color:var(--text);background:rgba(var(--ink),.05)} .obp-rs.arm:hover{color:var(--warn)} }
/* the SCOPE: this book, or every book — the kit's tabs (tabs-kit; js/ui/obpanel.js), across the panel, the book's mark on its own */
.obp-scope.ds-tabs{width:100%}
.obp-scope.ds-tabs .amk{flex:none;width:14px;height:14px}
.obp-note{margin:-2px 2px 0;font:500 10px/1.45 var(--mono);color:var(--faint);text-wrap:pretty;min-height:12px}
.obp-sec{display:flex;flex-direction:column;gap:9px;padding-top:9px;
  box-shadow:inset 0 1px 0 rgba(var(--shd),calc(.26*var(--shdK))),inset 0 2px 0 rgba(var(--lit),calc(.25*var(--litK)))}
.obp-row{display:flex;align-items:center;justify-content:space-between;gap:10px;min-width:0}
.obp-row[data-row="group"]{flex-direction:column;align-items:stretch;gap:7px}
.obp-l{display:flex;flex-direction:column;gap:3px;min-width:0}
.obp-l b{display:inline-flex;align-items:center;gap:6px;font:500 11px var(--sans);letter-spacing:.005em;text-transform:none;color:rgb(var(--ink))}
.obp-l em{font-style:normal;font:500 10px/1.3 var(--mono);color:var(--faint);text-wrap:pretty}
/* the mark a row carries while this book says something different about it */
.obp-own{width:12px;height:12px;border-radius:50%;padding:0;display:grid;place-items:center;opacity:0;transform:scale(.4);pointer-events:none;
  transition:opacity var(--tLeave) var(--settle),transform var(--tLeave) var(--settle)}
.obp-own::before{content:"";width:5px;height:5px;border-radius:50%;background:rgb(var(--acc2RGB));box-shadow:0 0 0 2px rgba(var(--acc2RGB),.18)}
.obp-own.on{opacity:1;transform:none;pointer-events:auto;cursor:pointer;transition-duration:var(--tState)}
@media (hover:hover){ .obp-own.on:hover::before{box-shadow:0 0 0 3px rgba(var(--acc2RGB),.3)} }
.obp[data-scope="all"] .obp-own{display:none}
.obp-seg{flex:none;flex-wrap:wrap;justify-content:flex-end}
.obp-seg>button{padding:0 9px}
/* the group bank holds twelve faces in two rows: one well that grows, the thumb reading each face's row (design-kit-d2) */
.obp-row[data-row="group"] .obp-seg{height:auto;justify-content:flex-start;gap:2px}
.obp-row[data-row="group"] .obp-seg>button{flex:0 0 auto;height:18px;padding:0 7px;min-width:34px;justify-content:center}
/* THE METER under each grouping: how much of the book it fits */
.obp-seg button u{position:absolute;left:5px;right:5px;bottom:2px;height:2px;border-radius:1px;opacity:0;pointer-events:none;
  background:rgba(var(--ink),.14);transition:opacity var(--tState) var(--settle)}
.obp-seg button u::after{content:"";position:absolute;inset:0;border-radius:inherit;background:rgba(var(--bidRGB),.9);
  transform-origin:0 50%;transform:scaleX(var(--c,0));transition:transform .35s var(--settle)}
.obp-seg button u.k{opacity:1}
/* SHOW: three switches, each with its own lamp */
.obp-shows{flex-direction:row;align-items:center;justify-content:space-between;gap:10px;flex-wrap:wrap}
.obp-chips{display:inline-flex;gap:4px;padding:3px;border-radius:8px;background:var(--segWell);box-shadow:var(--segWellSh)}
.obp-chip{height:22px;padding:0 9px 0 7px;display:inline-flex;align-items:center;gap:6px;border-radius:5px;font:500 10px var(--mono);
  color:var(--dim);background:var(--plate);box-shadow:var(--plateShSm)}
.obp-chip.on{color:var(--onDark);box-shadow:none}
.obp-led{width:5px;height:5px;border-radius:50%;background:rgba(var(--ink),.22);transition:background-color var(--tState) var(--settle),box-shadow var(--tState) var(--settle)}
.obp-chip.on .obp-led{background:rgb(var(--bidRGB));box-shadow:0 0 6px rgba(var(--bidRGB),.7)}
.obp-walk{align-items:flex-end}
.obp-fd{flex:0 0 168px;display:flex;align-items:center}
.obp-fd .ds-sl{flex:1;min-width:0}
/* =====================================================================
   THE NARROW WINDOW (v9 · Q200; js/ui/narrow.js, docs/MOBILE.md → THE PHONE LAYOUT IS HELD).
   While the phone layout is held, a desk window under the phone's line is covered by one calm plate: the mark, what to
   do, and the window's width against where the desk opens, in the figures' face; the desk runs on under it. It comes
   and goes by its opacity alone. Until its code lands (narrow.js, fetched the first time a window is narrow) the ground
   is laid here alone, under the loading screen and over the desk, so no squeezed desk is seen in between.
   ===================================================================== */
html[data-narrow] body::after{content:"";position:fixed;inset:0;z-index:999;background:var(--void)}
#narrow{position:fixed;inset:0;z-index:1100;display:grid;place-items:center;padding:24px;background:var(--void);color:var(--text);
  opacity:0;visibility:hidden;transition:opacity .24s var(--settle),visibility 0s linear .24s}
#narrow[data-on="1"]{opacity:1;visibility:visible;transition:opacity .24s var(--settle),visibility 0s}
.nw-in{display:flex;flex-direction:column;align-items:center;text-align:center;margin-top:-4vh}
.nw-y{display:block;width:38px;height:38px}
.nw-y rect{fill:var(--panel2);stroke:var(--text)}
.nw-y path{fill:var(--accent2)}
.nw-h{margin:22px 0 0;font:600 22px/1.3 var(--sans);letter-spacing:-.018em;color:var(--text)}
.nw-w{margin:10px 0 0;font:500 12px/1.45 var(--mono);letter-spacing:0;color:var(--faint);font-variant-numeric:tabular-nums}
.nw-w b{font-weight:600;color:var(--text)}
